1/4
Inductive Vehicle Loop Detector for Car Parking Barrier Loop Detectors/Vehicle Access Loop Sensor
Recommended Price
Recommended retail price from the manufacturer and provided by the seller.
Sold by Qiudie-homelavafans
You may also like
Compare with similar items
Product information
Description
Description
1. The pulse relay can be configured to activate vehicle detection or when the vehicle leaves the loop.
2. This feature determines the non-detection level at maximum sensitivity to avoid detecting vehicles such as large trucks.
3. The sensitivity can be adjusted using four sensitivity settings on the switch.
4. Four frequency configurations can be used to prevent signals from interfering with adjacent loops.
5. This relay is typically used to prevent false detection of small or fast-moving objects. Specification: When the detector is tuning, the green channel LED and the red power LED will light up.The green LED will remain lit for approximately 2 seconds before turning off.If there is a loop fault, the channel LED will light up and flash to indicate a fault.If the fault is self-repairing, the detector will continue to operate.The green channel LED will also light up as soon as the vehicle is detected passing through the inductive loop.H to 1000?H (ideally from 100?H to 300?H).
Loop connection wiring: Maximum length 20 meters, twisted at least 20 times per meter.
Package list:
1 * barrier opener
1 * connection terminal
1 * instruction manual
Note:
1. The detector must be installed in a convenient, weatherproof position as close as possible to the loop.
2. The installation location must be chosen away from the heat source.
3. Other equipment surrounding it must be at least 10mm away (it must not be firmly fixed to the wall).
4. Proper loop configuration and detector installation will ensure a successful inductive loop detection system.
5. Several important loop parameters include: cycle diagram, size, turns, and installation method.
6. Please note that the new and old types of this product will be sent randomly, and make sure you don't mind this before ordering.
2. This feature determines the non-detection level at maximum sensitivity to avoid detecting vehicles such as large trucks.
3. The sensitivity can be adjusted using four sensitivity settings on the switch.
4. Four frequency configurations can be used to prevent signals from interfering with adjacent loops.
5. This relay is typically used to prevent false detection of small or fast-moving objects. Specification: When the detector is tuning, the green channel LED and the red power LED will light up.The green LED will remain lit for approximately 2 seconds before turning off.If there is a loop fault, the channel LED will light up and flash to indicate a fault.If the fault is self-repairing, the detector will continue to operate.The green channel LED will also light up as soon as the vehicle is detected passing through the inductive loop.H to 1000?H (ideally from 100?H to 300?H).
Loop connection wiring: Maximum length 20 meters, twisted at least 20 times per meter.
Package list:
1 * barrier opener
1 * connection terminal
1 * instruction manual
Note:
1. The detector must be installed in a convenient, weatherproof position as close as possible to the loop.
2. The installation location must be chosen away from the heat source.
3. Other equipment surrounding it must be at least 10mm away (it must not be firmly fixed to the wall).
4. Proper loop configuration and detector installation will ensure a successful inductive loop detection system.
5. Several important loop parameters include: cycle diagram, size, turns, and installation method.
6. Please note that the new and old types of this product will be sent randomly, and make sure you don't mind this before ordering.
Features
- BrandOTHERS
- ColourMulticolour
- Pcs per pack1
- MaterialPlaster
- Motorisation accessory typeRemote-control
- Motorization useFor gate
- ManoMano ReferenceME242413661
- MMID255423894520
- Product codeQD-GB26Y47229
- EAN5007193872198
You are here:










