Inflatable Boat Sup Pump Adapter Standard Schrader Conventional Air Pump Air Valve Adapter Spoke Plate Attachment

General description The Inflatable Boat Sup Pump Adapter allows you to connect any standard electric pump, floor pump, or compressor to the Schrader valve connector, which is the standard valve for car and bicycle tires. It is compatible with most inflatable boards, as well as boats and kayaks that utilize the Halkey-Roberts valve for inflation. Technical specifications Compatible with Schrader valve connectors Inflation pressure capability: up to 20 psi Installation Remove the valve cap of your SUP and ensure the valve is sealed for inflation by turning the center pin to the outward/closed position. Insert the valve adapter into the SUP valve as you would insert the pump hose barb. Connect any standard Schrader pump to the valve adapter to inflate your board. Usage Use your compressor or tire pump to inflate your board. It is recommended to inflate the board with a hand pump until inflation becomes difficult, then use the adapter to complete the pressure. Regularly check the board pressure to avoid over-inflation.