1/4
Inflatable boat SUP pump adapter, standard Schrader, conventional air pump, air valve adapter, spoke plate mounting
Of which environmental contribution £0.01 including VAT.
Sold by CHAO WORLDWIDE
You may also like
Compare with similar items
Product information
Description
General Description
The inflatable valve adapter allows you to connect any standard electric pump, foot pump, or compressor to the Schrader valve fitting, the standard valve for car and bicycle tires. It works on most inflatable boards as well as boats and kayaks using the Halkey-Roberts valve for inflation. This adapter is solely intended to facilitate inflation, and the speed at which your board inflates will depend on the pump used.Technical Specifications
- Valve Type: Schrader
- Maximum Pressure: 20 psi
Installation
- Remove the SUP valve cap and ensure the valve is sealed for inflation by turning the center pin to the outward/closed position.
- Insert the valve adapter into the SUP valve as you would insert the pump hose nozzle.
- Connect any standard Schrader pump to the valve adapter to inflate your board.
Usage
- It is recommended to inflate the board with a hand pump until it becomes difficult to pump, then use the adapter to complete the inflation. pressure.
- Check the board's pressure frequently to avoid over-inflation.
Features
- BrandXISRENS
- Height10 mm
- MaterialLinden
- Pcs per pack1 .
- Compressor accessory typeValve
Advice from
Air tool buying guide
Air tools, such as rotary hammers, nail guns and impact wrenches, are often more comfortable to use than electric tools. But if you have prolonged or intensive tasks to carry out with a sander or paint sprayer, you'll need an air compressor. From air flow to pressure, read on for all you need to know about air tools!
'/%3E%3C/svg%3E)
You are here:
'/%3E%3C/svg%3E){kind=small}