Infrared Laser Digital Display 16-Line Level Indicator Green Light Projection Line Indicator

The laser level meter can output visible horizontal, vertical and tilt laser lines for automatic leveling separately or simultaneously. Provides accurate horizontal and vertical references for indoor construction layout and calibration, easy to use and versatile. Suitable for floor tile layout, paneling, wallpaper, stenciling, wainscoting, finish carpentry, wall stud layout and partition installation. You can try.

Features:

1. Compact size, light and portable, providing quick and convenient mobility and storage with the carrying case.

2. Output 16 laser lines separately or simultaneously for finer positioning, with 3-degree self-leveling system, flexibility and stability.

3. Using high-quality laser diodes and high-precision conical mirrors, the emitted laser lines are thin and bright with high precision, and the brightness is adjustable.

4. Equipped with self-test calibration function, automatic leveling within 3 degrees, but if the angle is greater than 3 degrees, the laser light will keep flashing and the laser level will beep to remind you to reset them on a flat ground.

5.LCD screen design, you can clearly see the remaining battery capacity.

6.Push button design, press right to open, press left to close.

7.Touch button design, horizontal line, vertical line and tilt line with clear division.

8.The button is wear-resistant, with high sensitivity to quickly switch line modes and with comfortable hand feeling.

9.Press the OUTDOOR button for 3 seconds to enter the tilt mode, then you can place the laser tool any angle to project the tilt lines; Short press or long press the OUTDOOR button on the H or V button, you can freely adjust the laser brightness according to the working conditions.

10.Comes with a remote control, H = vertical line, V = horizontal line, and you can adjust the brightness of the laser light easily by pressing the + or - button.