Intelligent electrostimulation (EMS) abdominal muscle massager for fat elimination, 8 modes and 18 intensity levels, for neck, back and arms.

Features: 1. Use: General massage of the abdomen, arms, back, neck, and legs; 2. EMS micro-pulses activate and relax muscles; 3. Automatic shut-off after 15 minutes. To reuse, simply turn it back on. If there is no skin contact or use, the device resets after 5 seconds and automatically shuts off after 30 seconds; 4. Eight modes and 18 intensity levels are available to meet everyone's massage needs. (Mode 1: Shiatsu; Mode 2: Scraping; Mode 3: Kneading; Mode 4: Acupuncture; Mode 5: Massage; Mode 6: Effleurage; Mode 7: Remodeling; Mode 8: Full Mode) Specifications: Product Name: Multifunctional Abdominal Massager Material: PU SMD Operating Current: 9.8 mA Operating Voltage: 3.7 V Operating Frequency: 1-100 Hz Recommended Ambient Temperature: 10-40 °C Conductor Material: Hydrogel Wire (generally usable 15-20 times) Standby Current: Less than 10 A (measured at 3.7 A) Battery Type: 150 mAh rechargeable lithium-polymer battery (402030), charges in 2 hours, battery life of 3-6 hours Instructions: 1. Attach the main unit to the magnetic latch located at the front of the massage stick (a). 2. Tear off the protective film from the massage adhesive and apply it to the area to be massaged. 3. Press the "+" button on the device to turn it on. 4. Press the "M" button to select a mode. Eight massage modes are available. The default intensity level is 1, and the corresponding indicator light will illuminate. 5. Press "+" or "-" to adjust the intensity (18 levels in total). 6. Press the "-" button on the device to return to level 0 and turn the device off. The gel patches are for single use only: do not wash with water, do not expose to sunlight, and store in a cool place. Replacing the hydrogel patch: (1) Remove the used patch. (2) Open the packaging (two patches per pack). First, peel off a protective film, locate the patch to be replaced, adjust it, and apply it by pressing firmly. (3) The device is ready for use. peel off another layer;