Inverter welding machine, 120A IGBT MMA inverter welders, manual metal arc welding equipment, versatile smart welders

• 1 "+" output terminal: For connecting the electrode holder.
• 2 "-" output terminals: For connecting the ground clamp.
• 3 Welding current knob: For adjusting the output current.
• 4 Power LEDs: Indicate power supply. A lit power LED indicates that the machine's power switch is on.
• 5 Overheat LEDs: Indicate overheating. A lit overheat LED indicates that the temperature inside the machine is too high and that the machine is in overheat protection mode.

Note:

• Turn off the power switch before any electrical connection operation.
• This machine has an IP21S protection rating, so avoid using it in the rain.

Installation Method

• 1 A main power cable is available for this welder. Connect the power cord to the rated input power.
• 2 The primary cable must be securely connected to the correct socket to prevent oxidation.
• 3 Check that the voltage value varies within an acceptable range with a multimeter.
• 4 Insert the cable plug with the electrode holder into the "+" socket on the front panel of the welding machine and tighten it clockwise.
• 5 Insert the cable plug with the clamp into the "-" socket on the front panel of the welding machine and tighten it clockwise.
• 6 Grounding is required for safety reasons.

Product Size:

• Item Size: 230 * 90 * 129 mm / 9.06 * 3.54 * 5.08 inches
• Item Weight: 2530 g / 5.58 lb
• Package Size: 290 * 120 * 230 mm / 11.42 * 4.72 * 9.06 inches inches
• Package weight: 2730 g / 6.02 lb

Packing list:

• 1 * Welding machine
• 1 * Electrode holder
• 1 * Welding clamp
• 1 * Mask
• 1 * Steel brush
• 1 * Guide line