IPC-9800CMADHS Pro CCTV Tester, 7-inch IPS Touchscreen, 8K IPC and CCTV Camera Testing, 4K 8MP HD-TVI CVI AHD SDI, Multimeter, PoE HDMI VGA WiFi RS485 Cable Tester

Multifunctional Tester: 7-inch IPS touchscreen, 1280×800 HD resolution, intelligent operating system, rich interfaces. It is mainly used for the installation and maintenance of security surveillance systems, network maintenance, cable testing, etc. It is a comprehensive, multifunctional testing tool suitable for on-site operators. CCTV Tester - IP & HD Camera: The CCTV tester supports testing IP cameras up to 8K 32MP 8160×3616P and 4K 12MP 4000×3000P with network traffic detection. Features include Rapid Video, automatic viewing, and test reporting. Integrated IP/ONVIF/IPC/RTSP tools with HIK, DH, and ONVIF applications for quick configuration; supports batch setup for Hikvision and Dahua cameras. Compatible with 4K coaxial cameras (3840×2160P 8MP TVI/AHD/CVI/EX-SDI/HD-SDI/3G-SDI) and analog CVBS. Auto HD camera type recognition, UTC and OSD menu control, PTZ control, and RS485 with over 30 protocols (PELCO-D/P). NTSC/PAL adaptation and CVBS color testing. Cable Tester: Supports UTP cable testing, used to test network cable type, transmission rate, line sequence, RJ45 connector connection status, and cable length. The RJ45TDR function can test cable pair status, length, attenuation, reflectivity, impedance, tilt, and range up to 180 m (590 ft). The multifunction tester with digital cable tracer allows you to quickly locate the target cable among numerous cables and is suitable for various types of metallic cables. Simultaneously, the cable tracer also supports non-contact voltage detection (NCV) and PoE PD testing. Network function for CCTV: Dual Gigabit network interface (RJ45), adaptive 10/100/1000 Mbps, supports network signal loopback. Built-in 2.4 GHz Wi-Fi, 150 Mbps throughput, supports access point creation and Wi-Fi analysis. Integrated professional network testing tools support IP analysis, route tracing, link monitoring, link statistics, DHCP server, port blinking, ping testing, LLDP, etc., enabling rapid network testing. It supports FTP server function. Digital multimeter (DMM): DC and AC voltage measurement, resistance measurement, continuity testing, diode testing, and capacitance measurement. DC & AC Voltage (V): Maximum range 660 V. DC & AC Current (A): Maximum range 10 A. Resistance (Ω): Maximum range 66 MΩ. Capacitance (F): Maximum range 66 mF. Diode measurement. The tester's multimeter can also test continuity. Automatically adjusts to 0