This product shouldn't be part of this category?

ISF FLAMEPRO FP2 Low Odour Furniture Flame Retardant Top Coat 5L (select finish)

90% Sheen (Gloss) 5L ISF FLAMEPRO FP2 Low Odour Furniture Flame Retardant Top Coat

Reference: ME1329614

In stock

View full description

£89.64

Delivery from £6.60

Available models:

£89.64

Delivery from £6.60

Orders over £0.00 with this seller qualify for free delivery

Quantity:

- +

Uh oh…it's not possible to order less than 1 unit of this product.

Sorry, you can only order up to 1000 units of this product!

Secure payment by debit or credit card

Sold by: Avenue Group

100% positive reviews (5161 sales)

Available delivery options:

Standard delivery in 3 to 5 working days (P&P starting at £6.60)

Delivery to the British Isles only (UK, Jersey and Guernsey)

This product shouldn't be part of this category?

90% Sheen (Gloss) 5L ISF FLAMEPRO FP2 Low Odour Furniture Flame Retardant Top Coat

Description

£89.64

FLAMEPRO FP2-Lo
Clear Two Pack Class 1 / Class 0 Flame Retardant Lacquer

British Standard 476 Part 7: 1997 Class 1 spread of flame
Performs similar to an acid-cat system. Low odour formulation
Good flow & film clarity. Easily re-coatable
Hardwearing with good marr resistance
COVERAGE: 8-10 Sq.m/lt
TOUCH DRY: 20 mins
RECOAT TIME: 60 minsmAX RESISTANCE: 7/28* Days
POT LIFE: 12 HoursmIX RATIO: 2 Part 9:1

USES

Interior joinery & furniture.

TOPCOAT

FP2-Lo Catalyst 9:1 mix ratio

FLAMEPRO FP2-Lo Clear Class1/0 10%
FLAMEPRO FP2-Lo Clear Class1/0 25%
FLAMEPRO FP2-Lo Clear Class1/0 35% Sheen
FLAMEPRO FP2-Lo Clear Class1/0 50% Sheen
FLAMEPRO FP2-Lo Clear Class1/0 90% Sheen

BASECOAT

FP2-Lo Catalyst 9:1 mix ratio

FLAMEPRO FP2-Lo Class1/0 Sealer

THINNERS

18805 FPT Thinners
FLAMEPRO FPT Virgin Thinners
FLAMEPRO FPT Anti Bloom Thinners

CLEANER

ISF Spray Gun Cleaner

EQUIPMENT

Conventional airless / airmix or HVLP spray equipment.

APPLICATION

Mix 9 Parts FP2-Lo Part A with 1 Part FP2-Lo Catalyst. Apply a light coat of FP2 Sealer, allow to dry, de-nib & apply another sealer coat as necessary. Then after a further de-nib apply a full even coat of the FP2-L0 Top Coat & allow to dry. Once catalysed, thinners not normally necessary, however FPT thinners may be used if required up to a maximum of 5% by volume. Leave to dry overnight prior to packing. Copies of the test reports are available on request.

INFORMATION

Please ensure that the total system film thickness (DFT) does not exceed 150 microns. Always lightly sand between coats to assist adhesion. Maximum 2 coats in any 8 hours. FLAMEPRO FP2-Lo will not up-grade to Class 1 or Class 0 rating - it will only maintain the rating of the substrate. Please allow 28 days prior to testing to BS 476.