JRDDS-D173P-01 Mini-Fit Jr. Pin Removal Tool (Molex Equivalent 11-03-0044) for Jr. Series ATX Pin Removal -

The JReady Mini Fit Jr. disconnect tool is particularly suitable for crimping pins and sockets of the Mini Fit Jr. series, as well as for maintaining electronic board connectors. The JRDDS-D173P-01 Molex pin extractor allows for more efficient terminal removal without the need for wires. The JRDDS-D173P-01 pin extractor, equivalent to MOLEX part number 11-03-0044, is designed to efficiently remove crimped Mini-Fit Jr.™ terminals (part numbers 30490, 44476, 44478, 5556T, T2, T3, and 5558T) from their sockets. It features an integrated ejector rod with a piston pin extractor equipped with a built-in assist spring. During operation, the needle head slides along both sides of the contact from the front and releases the locking trigger. By pushing the ejector rod, the spring ejects the contact backward, allowing for quick, convenient, and efficient pin removal. Important Notice: The JRDDS-D173P-01 extraction tool is designed for 4.20 mm (0.165 in.) pitch Mini-Fit family crimp terminals (part numbers 5556, 5558). For 3.0 mm (0.118 in.) pitch Micro-Fit family crimp terminals, use the JRDDS-D145P-01 for male pins and the JRDDS-D120P-01 for female pins. This tool is not universal for all Molex connectors. Verify the tool's compatibility with your connector to avoid inefficient operation and potential damage. For technical assistance or tool recommendations, please contact us to prevent errors and damage to terminals and connectors. The JRDDS-D173P-01 electrical terminal removal tool is distinguished by its glossy camouflage handle. Its stylish and highly visible camouflage design is combined with an improved ergonomic hexagonal grip, providing a comfortable and non-slip hold. Due to the diversity of connectors, different pin removal tools are required depending on the model. To ensure you select the correct tool, you can contact us before purchasing to confirm the specific model you need. JRDDS-D173P-01 Mini-Fit Jr. Pin Removal Tool (Equivalent to Molex 11-03-0044) / Terminal Puller for the Jr. Series. With integrated piston for ATX removal.