JSSEVN - 35mm Concealed Hinge Jig, Adjustable Edge Depth Drilling Guide, Versatile Cabinet Door Hinge Installation Tool

Improved: The 35mm concealed door hinge jig features an enhanced rubber pressure plate and a quick-release clamp to ensure precise positioning and fast drilling. Say goodbye to tedious manual measuring and marking of hinge positions.

Durable Material: The metal cabinet hinge is equipped with integrated double bearings and its body is made of high-quality, wear-resistant, and durable aluminum alloy. The 35mm carbide drill bit is strong and sharp for easier installation of cabinet door hinges.

Triple Adjustment: The concealed hinge clamp can accommodate panel thicknesses from 12 to 25mm and opening depths from 10 to 15mm. You can adjust the panel using a wrench until you achieve the desired thickness.

The distance between the 35 mm holes and the edge can be adjusted within a range of 3/4/5/6 mm.

Instructions for Use: 1. Adjust the knob position to the thickness of the clamping plate. 2. Quickly tighten the locking plate according to the drilling mark. 3. Adjust the drilling depth of the limiting ring, usually 12-13 mm. 4. Drill 35 mm and 2 mm screw holes on the left/right. 5. Install the hinge.

List of Supplied Items: 1 x 35 mm hole opener; 1 x hex keys; 1 x 12 mm limiting ring; 1 x adjustable wrench; 2 x 2.5 mm HSS Tri-Tip drill bits; 1 x 35-hole alloy three-flute double-edged drill bit