Kayak adapter, inflation valve adapter for boat air pump for kayak

With the inflatable valve adapter, you can connect any standard electric pump, foot pump, or compressor to the valve, including standard car and bicycle tire valves.

It is compatible with most inflatable boards. It is also suitable for boats and kayaks using this type of valve. Use your compressor or tire pump to easily reach 20 psi. Be careful not to over-inflate your board or boat and check the pressure regularly.

This is an adapter only. The inflation speed of your board depends on the pump used. Since compressors are slower, it is recommended to inflate the board with a hand pump until it becomes difficult to inflate, then use the adapter to reach the desired pressure.

Remove the valve cap from your SUP and ensure the inflation valve is fully closed by turning the center pin outward.

Insert the valve adapter into the SUP valve in the same way you would use the pump hose nozzle. Connect any standard pump to the valve adapter to inflate your board. Regularly check the board's pressure during inflation.