Tent stove connection kit, high-temperature silicone hose, roof flashing, tent with triple-walled sections, black

Function: 1. Product Size: Suitable for pipes with an outside diameter between 4.5 cm and 10 cm. If larger than 4.5 cm, you will need to cut your own rings. Please confirm the size of your chimney pipe base before purchasing. 2. High Temperature Resistant: The tent flue flashing kit is made of heat-resistant silicone and stainless steel. Maximum tolerance 280℃. The silicone has good temperature resistance and is flexible, allowing for the expansion, contraction, and vibration of the pipe, making it less prone to damage or deformation. 3. Protect Your Tent: The tent stove flashing kit is ideal for use with 3 wall pipe sections to prevent hot chimney pipes from directly contacting your tent or shelter and provides a watertight seal around the chimney pipe at the outlet point, thus protecting the tent. 4. Easy to install: First, cut the correct size with scissors, then cut the corresponding chimney pipe. Next, unscrew the screws and nuts on the base to secure it in place for easy installation and removal. 5. Wide application: The thick folds and stainless steel rings at the bottom allow it to adapt to any roof pitch or metal profile. This tent stove flashing is suitable for a variety of uses and can be used with bell tents, tents, yurts, cabins, sheds, boats, houseboats, summer homes, workshops, garages, and anything else requiring a flue outlet. 405.00 g / 14.29 oz Heat resistance temperature: 280°C Fits chimneys: 4.5 to 10 cm / 1.8 to 3.9 inches (rings may need to be trimmed if larger than 4.5 cm) Product diameter: 16 cm / 6.3 inches How to use: Step 1: Opening the tent chimney hole: Determine the location of the chimney hole on the tent. Mark the screw positions on the circular steel piece of the chimney hole and drill holes accordingly. Step 2: Cut two pieces of wear-resistant material to the same shape as the circular steel piece, using the circular steel piece from the silicone sleeve as a template (heavy fabric can also be used as a substitute). This step is optional, but adding wear-resistant material can better protect the tent from wear. Step 3: Place the cut, wear-resistant material and the steel piece inside the tent opening, and insert the screws from the inside out. Step 4: Place the wear-resistant material, the silicone sleeve, and the steel piece from the outside, and tighten the screws with nuts to secure them. Step 5: Cut the tent fabric inside the silicone rings to complete the opening. Step 6: After installation, insert the chimney for immediate use. If the chimney diameter is greater than 4.5 cm, you can trim the silicone rings accordingly. Package List: 1 x Tent Stove Flashing, 1 x Wrench