The Universal Emergency Module (UEM) is suitable for class III luminaires with integrated LEDs and separate LED drivers. The UEM will supply the luminaire with up to 3W of power for three hours. The UEM will adjust the DC voltage output within the UEM’s limits to the level required to operate the luminaire and then adjust the current to limit the power to a maximum of 3W to ensure operation time of three hours. The UEM has a replaceable internal lithium-ion battery and can be installed within a luminaire or within the ceiling void to provide a back-up supply in the event of a power cut. The UEM requires a permanent live un-switched supply to maintain the battery charge. In the event of a power cut the battery within the UEM will supply the luminaire through a connection that must be made between the LED driver output and LED luminaire input.
For class III luminaires with integrated LEDs and separate LED driversFor maintained or non-maintained emergency lighting systemsConforms to EN 61347-1 and EN 61347-2-7Supplied with plug-in Three-Way Connector with DC jacks that can also be wired via internal terminalsSuitable for use in luminaires for high-risk task area lightingVoltage change-over threshold according to EN 60598-2-223 hours rated durationInternal Li-Ion battery for improved lifespan allowing frequent partial discharge without capacity reductionOver-charge, over-current, short-circuit and deep discharge protection for batteryGreen charging status LEDColour Finish: BlackInput Current (mA): 35Input Voltage: 220-240Vac 50-60HzIP Rating: IP20Class Protection: Class IIInput to Output Protection: Double InsulationOutput Wattage (W): 2.3-3.3Output Voltage (Vdc): 9-58Output Current (mA): 50-130Open Circuit Voltage (Vdc): 60Maximum Working Voltage (Vdc): 58Length (mm): 230Width (mm): 46Depth (mm): 26Maximum Case Temperature (°C): 75Ambient Temperature (°C): -10 to 45Emergency Conversion Time (seconds): 1Emergency Operating Time (hours): > 3Test Function: ManualBattery Code: KBAT2600Battery Voltage (V): 7.4Battery Capacity (mAh): 2600Battery Type: Li-IonBattery Charge Voltage (Vdc): 8.5Battery Charge Current (mA): 30-210Battery Discharge Voltage (Vdc): 6.0-8.4Battery Discharge Current (mA): 600-700Battery Life (years): 4Charging Time (hrs): 12Barcode: 5060063426617