KTS 011 Temperature Controller Thermostat (normally open) for controlling fans or switching signaling devices

General Description

The ZVD-Temperature Controller KTS 011 is a normally open thermostat designed to control fans or switch signaling devices. It is particularly suitable for electric heaters and cooling fans in electrical cabinets, where accidents can occur due to temperature fluctuations. This thermostat is distinguished by its small size, simplified installation, and high switching performance.

Technical Specifications

• Type: Normally Open Thermostat
• Temperature Control Range: ±7K (tolerance ±4K)
• Sensing Element: Temperature-Sensitive Material
• Contact Type: Snap-Action Contact
• Contact Resistance: <10 mΩ
• Lifetime: > 100,000 cycles
• High-capacity switch: 250 VAC, 10(2) A; 120 VAC, 15(2) A; DC 30 W
• Dimensions: 60 × 33 × 43 mm

Operation

The KTS 011 thermostat operates on the principle of thermal expansion of bimetallic strips. When the ambient temperature exceeds the set temperature, the thermostat disconnects, thus interrupting the circuit. Conversely, when the ambient temperature is lower than the set temperature, the circuit closes and the load is activated.

Other information

• Note: Dimensions are measured manually; an error of 1 to 3 cm is possible.
• Colors may vary due to differences in lighting and display.