Landscape lamp, IP55 protection rating, solar powered, solar panel, 9 light colors for lawns, villas, paths, scenic spots

1. There are two installation methods: wall-mounted or plug-in, to meet your lighting needs in various settings.

2. The ABS + PC material forms a high-strength shell, providing robust protection with an IP55 rating, and can operate in various outdoor weather conditions. 3. Powered by a solar panel, no wiring is required, installation is easy, charging automatically during the day and illuminating automatically at night, without manual control. 4. The built-in high-capacity 18650 lithium battery, with a capacity of 2200 mAh, can provide up to 8-10 hours of illumination when fully charged and can light up your outdoor space all night. 5. Wide range of applications, suitable for outdoor settings such as courtyards, lawns, villas, pathways, scenic spots, parks, etc.

Specification:

Item Type: Solar Lawn Light.

Material: ABS + PC + Hardware. Color: As shown in the picture. Product size for floor insertion: Approx. 13.5 x 78 cm / 5.3 x 30.7 inches (W x H). Product size for wall hanging: Approx. 13.5 x 21 cm / 5.3 x 8.3 inches (W x H). Weight: Approx. 618g / 21.8oz. Power supply: Solar. Solar panel: 5.5V 250mAh solar panel. Energy storage battery: 18650 2200mAh lithium battery (included) Lamp bead model: 2835 Number of lamp beads: 12 Luminous flux: 150LM Light source: RGB Mode combinations: 9 types (red, green, blue, red-green, green-blue, red-blue, red-green-blue, red-green-blue, the first 8 types of sequential gradient) Protection level: IP55 Working hours: 8-10H Light duration: 6-8h Lifespan: 40000H

How to use:

1. Grounding plug installation: First, attach the outer cover to the support ring, connect the extension rod and the grounding insert, install the portable rod once finished, press and hold the bottom switch, place it in the outer protective cover, and it will automatically charge during the day and automatically turn on at night! 2. Wall installation: First, attach the outer cover to the support ring, connect the wall support rod and fix it to the wall with screws. After finishing, install the portable rod, press and hold the bottom switch, and place it in the outer protective cover. It will automatically recharge during the day and automatically turn on at night!

Package List:

1 Instruction Manual.

1 x Lamp Body

1 x Support Ring

1 x Outer Mesh Cover

2 x Extension Rods

1 x Ground Insert

1 x Wall Mount Bracket

1 x Extension Rod Connector

1 x Nut

2 x Screws

2 x Expansion Screws

1 x Hand Rod

Note:

1. Please allow 1-2 inches error due to manual measurement. Thanks for your understanding. 2. Monitors are not calibrated the same way; the color of the item shown in the photos may be slightly different from the actual object. Please consider the actual item as the standard.