Lathe cutting tools, turning tool holder, 6 turning tools, 10 mm boring bar, metal turning tools with carbide inserts, boring and groove cutting

General Description This set of 6 10mm turning tools is made of high-quality hard carbide, offering long tool life and low tool consumption, thus reducing tool costs. It is mainly used for rough, fine, and semi-fine machining of steel and stainless steel, and is used for surface turning and milling. Technical Specifications Types included: SCLCR 1010H06, SNR 0010K11, SER 1010H11, S10K SCLCR06, MGEHR 1010-2, SDNCN 1010H07 Material: Hard carbide Application: External turning tool Dimensions of SCLCR 1010H06: Shank diameter: 10 mm / 0.39 inch Length: 100 mm / 3.94 inches Dimensions of SNR 0010K11: Shank diameter: 10 mm / 0.39 inch Length: 125 mm / 4.92 inches Dimensions of SER 1010H11: Shank diameter: 10 mm / 0.39 inch Length: 100 mm / 3.94 inches Dimensions of S10K SCLCR06: Shank diameter: 10 mm / 0.39 inch Length: 125 mm / 4.92 inches Dimensions of MGEHR 1010-2: Shank diameter: 10 mm / 0.39 inch Length: 100 mm / 3.94 inches Dimensions of SDNCN 1010H07: Shank diameter: 10 mm / 0.39 inch Length: 100 mm / 3.94 inches Product weight: 612 g / 1.35 lb Package weight: 660 g / 1.46 lb Package dimensions: 220 * 150 * 40 mm / 8.66 * 5.91 * 1.57 inches Accessories included: 6 * Turning tools, 6 * Wrenches, 6 * Inserts. Usage: Insert installation: Use the provided wrench to install the hard carbide insert onto the corresponding turning tool. Tool Fixing: Secure the installed turning tool to the lathe or milling machine. Setting: Adjust the cutting parameters (spindle speed, feed rate, etc.) according to the material being machined (steel, stainless steel, etc.) and the operation (external turning, surface milling). Machining: Start the machine tool to perform the machining operation. Cleaning and Storage: After use, clean the tools and inserts, then store them safely. Safety Instructions: Always wear safety glasses and gloves when using turning tools. Careful Installation: Ensure that inserts are properly installed and tightened to prevent slippage or damage during machining. Appropriate Settings: Use the recommended cutting parameters for the material and tool to ensure optimal machining quality and extend tool life. Precautions: Keep tools and inserts out of the reach of children. Do not use damaged tools.