LED Ceiling Light with Motion Sensor, Super Bright Battery Operated Indoor Ceiling Lamp, for Attic, Laundry Room, Garage, Hallway, Staircase, 19cm 300LM Daylight

Product Description Integrated PIR infrared motion detector: When motion is detected within 8 meters in a dark environment, the LED ceiling light turns on immediately. After 20 seconds, when no motion is detected, it automatically turns off, saving battery power. 【Two Modes】There is a switch near the motion sensor; slide the switch to turn the photoelectric sensor on/off. When open, it is not illuminated during the day and is illuminated at night; when closed, it is illuminated all day. 【Battery-Powered Motion Detector】Powered by 4 D alkaline batteries (batteries not included), it can illuminate an area of 30 square meters. The battery provides up to 12 months of light with an average of 6 to 8 uses per day. 【Super Bright LED Light】Built-in 80 bright and long-lasting SMD2835 LEDs. It can spread light in all directions and up to 300 lumens of brightness to ensure you don't trip in the dark and to protect your loved ones and children from the horrors of the dark at home. 【Easy Installation & Wide Range of Applications】No wires required, quick and easy installation in 5 minutes. Perfect for your bedroom, bathroom, stairs, hallway, workshop, basement, garage entrance, roof, and door. This can prevent lights from being turned on unnecessarily and increasing your electricity bill. Specification 1. Sensitivity: approximately 8 meters 2. Sensor Range: approximately 120 degrees 3. Number of LEDs: 80 LEDs 4. Light Color: white 5. Delay Time: 20 seconds 6. LED Lifespan: 50,000 hours 7. Product Size: 19 x 19 x 6.5 cm 8. Material: ABS 10. Battery Required: 4 D-size batteries (not included) Installation Notes: 1. Rotate the product's back cover clockwise. 2. The retaining clip on the back cover can be easily lifted. The back cover can be rotated clockwise to open. 3. Use the included mounting hardware to mount the backplate to the wall, ceiling, or anywhere you want. 4. Insert the battery into the lamp's battery compartment. 5. Close the back cover, turn the lamp body clockwise, press down on the retaining cap, and turn the lamp body clockwise again to securely fasten the back cover. Package Contents: 1 x Motion-Sensing Ceiling Light 1 x Retaining Cap 1 x Instruction Manual 4 x Screw Sockets