LED Electronic Digital Luminous Car Watch Clock Accessory Decoration (Red)

1. Digital LED clock with backlight function, super bright, easy to read at night. Made with high-quality materials, sturdy, durable, and wear-resistant. 2. The large LED screen clearly displays the hours, minutes, seconds, date, and timer function. 3. Universal, suitable for most cars. Easy to install and remove. 4. Beautiful and stylish, instantly enhancing the appearance of your car. 5. Widely used in equipment, cars, boats, airplanes, etc. Input voltage of 4.5 to 30V, convenient and easy to use.

Specification:

Features: Digital LED clock with backlight function, super bright, easy to read at night. Made with high-quality materials, sturdy, durable, and wear-resistant. The large LED screen clearly displays the hours, minutes, seconds, date, and timer function. Universal, suitable for most cars. Easy to install and remove.

Beautiful and elegant, instantly enhancing the appearance of your car. It is widely used in equipment and cars, boats, airplanes, etc. Input voltage from 4.5 to 30V, convenient and easy to use. Specification: Material: ABS Optional color: red, green, blue Input voltage: 4.5-30V (wide range) Backup battery: CR1220 (clock backup power supply, can be maintained for more than 12 months without power) Working current: Power cable and key length: >120mm Min. supply voltage: +4.5V Max. supply voltage: +30V Operating temperature: -10 ~ +65 Working humidity: 10-80% (non-condensing) Working pressure: 80 - 106kPa Sun exposure: no direct exposure Size: approx. 48x29x21mm/ 1.89x1.14x0.83 inches Packing List: 1 x Digital Car Clock Instructions: Insert the CR1220 button cell battery into the battery holder according to the "top positive, bottom negative" orientation. (Note: If the battery is not installed or is installed upside down, the set time will be lost when the red and black wires are not powered.) When using batteries, the clock will continue to function even when not connected to a power source. Connect it to the power source according to the "red positive, black negative" method, and it will display 0:00. Key Switch Order: Hour/Minute Mode - Second Mode - Date Mode - Timer Mode Second Mode: Press the key once in hour mode, and the second will be displayed in XX format. It will automatically return to hour and minute mode after 30 seconds without pressing the key. Press the key again to advance to the next mode. Date Mode: Double-press the button in time mode, and the second will be displayed in the format: Month:Date. It will automatically return to hour and minute mode after 30 seconds. Press the button again to switch to the next mode. Timer Mode: Triple-press the button in time mode, and the second will be displayed in the format: 00:00. When the timer is not started, it will automatically return to hour and minute mode after 30 seconds without pressing the button. Press and hold the button to start timing in timer mode; the dot below the colon will begin flashing. Press and hold the button again to pause the timer. The dot below the colon will remain lit and will not flash. Press and hold it to resume timing. Synchronization Reset Method: The outer red and black lines will turn off. Press and hold the button for approximately 5 seconds. Press the button in timer mode to switch to hour and minute mode and display the date and seconds. Setting the time: In hour, minute, or second mode, press and hold the button until the "hours" number flashes, indicating that you are entering hour setting mode. Then, press the button repeatedly to adjust the hour. After setting the hour, press and hold the button until the "minutes" number flashes, indicating that you are entering minute setting mode. Press the button repeatedly to adjust the minute. After setting the minutes, press and hold the button until the "seconds" number flashes, indicating that you are entering second setting mode. Press once to clear the time, and press and hold to exit time setting mode and save the set time. During the time setting process, the device will automatically exit setting mode after 30 seconds of inactivity. Setting the date: In date mode, press and hold the button until "year" flashes, indicating that it is entering setting mode. Press the button repeatedly to set the year. Press and hold the button until the number "month" flashes, indicating to enter the month setting. Press the button repeatedly to set the month. Once the month is set, press and hold the button until the number "day" flashes, indicating to enter the day setting, then press the button repeatedly to set the day. Once the setting is OK, press and hold the button to exit date setting mode and save the setting. During the date setting process, it will automatically exit setting mode after 30 seconds of inactivity.