LED Floodlight with Remote Control, Flashing SOS Mode, Spot Lamp, DC 12V/24V, 27W, for Boats and Outdoor Use

Features:

1. LED Spotlight: The spotlight is composed of 12 super bright 5W LED bulbs. It is very durable and energy-efficient. The illumination can reach up to 200 feet. The lamp operates on 12V or 24V DC circuits and is equipped with overload, overheat, and overspeed protection.
2. Multifunctional: The spotlight can be rotated and tilted via the wireless remote control. It features a flashing mode, an SOS function, an auto-search function, and a reset function.
3. Bright Illumination: It can clearly illuminate the search target and is very suitable for nighttime use. Equipped with a wireless remote control, the remote is very sensitive and can be controlled wirelessly within a 30m radius.
4. Waterproof design: The LED spotlight features an acrylic lens and an IP65 waterproof PC lampshade, which can withstand low-pressure water jets from any direction. A PA washer on the bottom of the spotlight prevents slipping and impacts, ensuring a secure fit on your vehicle or boat.
5. Easy to install: For DC12V and DC24V applications. Suitable for vehicles, SUVs, trucks, ships, agricultural land protection, vessel lighting, etc.

Specifications:

Item Type: LED Spotlight
Model: E016001 B
Material: PC, Acrylic, PA.
Operation: Remote control
Beam angle: 6 ± 2°
Rotation: 340°
Elevation: 22° upwards, 48° downwards.
Rotation speed: 8-10° per second under 12V DC, 12-14° per second under 24V DC. Lifting speed: 11-14° per second under 12V DC, 19-21° per second under 24V DC. Power cord length: approx. 4 m / 13.12 ft
Power consumption: 27 W
LEDs: 12 pieces 5 W
Operating voltage: DC 12 V 2.2 A or DC 24 V 1.1 A. LED color and color temperature: sunlight white, 5500-6300 K. LED beam angle and luminous flux: 120°, 160-190 lm.
Effective luminous flux and power: 1600 lm, 200 W. Detection distance: approx. 30 m / 98.43 ft.
Remote control frequency: 433 MHz
Operating temperature: -20 ℃ ~ +45 ℃. 1000-hour LED lamp life test: luminous flux retention rate > 90%.
Waterproof rating: IP65
Remote control battery: 2 x 1.5V AAA, shipped without batteries.
A. Installation Instructions:
1. The spotlight should be installed on a flat, smooth surface for optimal use. Keep the light away from sails, cable anchors, or any other location that could damage the light. You must access the underside of the selected location and drill at that location. Ensure there are no wires or other structures where the screws need to be drilled.
2. To minimize glare, it is best to install the light fixtures as far forward and as high as possible.
3. The four mounting holes in the base and the holes in the center harness on the washer's mounting surface must be aligned according to the user manual. 4. Drill four 1/8" pilot holes at the marked points. 5. Place the white circular mounting washer on the lamp base and ensure the harness passes through the center hole in the washer. 6. Feed the wire from the lamp base through the center hole in the mounting surface. Sealant can be applied around the guide hole and the harness through the mounting surface. 7. Wire connection: The red wire must be connected to the red wire on the spotlight, and the black wire must be connected to the black wire on the spotlight. 8.Attach the lamp to the mounting surface with the lens facing forward. Align the four holes in the lamp holder and mounting gasket with the four angled holes drilled in the mounting surface. 9. Use four M5 self-tapping screws to securely attach the projector. Do not overtighten. B. Initial Remote Control Programming: 1. Press and hold the PA button on the remote control. 2. While holding the button, connect the red wire to the positive terminal and the black wire to the negative terminal. 3. After 10 seconds, release the button. When the button is released, the remote control will be programmed. 4. The remote control will be fully operational. 5. To clear the previous pairing with the remote control, press and hold the CL button, then turn on the light until it flashes once, then release the CL button. Re-pairing the remote control will restore normal operation.

Package List:

1 x LED spotlight 1 x Remote control 1 x 4m power cord 1 x Washer 1 x User manual

Note:

1. When the light is rotating to its maximum angle, please do not continue pressing the rotation button on the remote control. This could cause excessive strain on the circuit and a bulb failure. 2. This spotlight can only be operated with the included remote control, so please do not modify the light or attempt to use the remote control from other devices to operate the power-hungry lamps.