LED Light Dimmer 5-200W, Dimmable LED Dimmer Switch 220V-240V, Rotary LED Dimmer for dimmable, incandescent, halogen LED lamps. Quiet and energy efficient

Compatible with 5-200W dimmable LED/incandescent/halogen lamps, voltage range: AC 200-240V. Please NOTE that it does not apply to 12V low voltage bulbs.【Please check the circuit connection diagram and compatible bulb types before purchasing!!】   Dimming from 0% to 100% allows your eyes to gradually adapt to the light, reducing eye fatigue. No noise during the dimming process! White cross" for optimal adjustment of LED dimmers for recessed mounting.   Note 1: Before purchasing, please check whether your LED bulb is marked "dimmable". If not, it can only be used to switch the bulb. 2: It cannot be used to control motor and fan speed. 3:Some LED bulbs have limited dimming capability due to their structure, which may result in flickering (e.g. R7S incandescent bulbs).   Below the specified minimum load or concentrated pulses from the power plant, connected lamps and lanterns flicker. This does not mean that the equipment is defective, the LED rotary dimmers are compatible with wall panels of various well-known brands.   Luminaires for which the front-cut dimming scheme is not applicable, for example COB lamps. Only for luminaires with a back-cut dimming scheme, e.g. incandescent lamps, halogen lamps.   You will receive: 1* LED rotary dimmer, 1* Manual.   CE and ROHS certified, with overvoltage protection, overcurrent protection, overheating protection, short circuit protection and other multi-protection mechanisms to ensure the safety of you and your family.Product parameter
Operating voltage: 220-240VAC / 50Hz
Ambient temperature: +0 to +45 load connected to 25 ℃
Performance data including transformer power loss. Maximum load: 200 W. Minimum load: 5W
PF = power factor: PF> 0.9 5 to 200W. PF = 0.5-5-100W.
Warm Tips
1.The LED dimmer series is designed for single or double sided operation.
2. More than one dimmer cannot be connected in parallel or series to control the same load from two different locations.
3. The dimmer mechanism is not polarity.
4.It cannot be used for speed control of transformers, fans and inductive motors. Before purchasing, please check whether your LED bulb is marked "dimmable". If not, it can only be used to switch the bulb. It cannot be used to control the speed of the motor and fan.

Note: Dimmable LED dimmer is only suitable for dimming lamps over 5W, otherwise it will flash.

The dimmer works like a normal wall switch and dimmer. You can place it anywhere on the back of the switch using screws or tape.

1. Is the device only compatible with dimmable LED lamps?

Answer: Yes, dimmers are only suitable for adjusting the brightness of dimmable LEDs, incandescent lamps and halogen lamps.

-This item only applies to dimmable lamps above 5W, otherwise it will flicker.