Light Grey Set of 12 Corrugated Galvanised Steel Roof Sheet Panels 129 x 45 cm

Product presentation

This set includes 12 light grey corrugated galvanised steel roof sheets. They are designed to make or renovate a light covering on different types of outdoor structures. Their 129 cm length by 45 cm width format allows a total theoretical surface of about 6.97 m2 to be covered, before taking the overlaps needed for fitting into account.

The corrugated galvanised steel sheet is a practical solution for protecting a shed, storage room, workshop, outbuilding or other light construction against bad weather. The corrugations promote rainwater flow and bring good rigidity to the sheet while keeping a reasonable total weight of 14 kg for the set.

Key benefits

• Complete set of 12 galvanised steel covering panels.
• Total theoretical surface of about 6.97 m2, excluding overlap between the sheets.
• Galvanised steel contributing to the protection of the material against oxidation and damp.
• Corrugated profile suited to rainwater evacuation.
• Light grey colour easy to integrate into different outdoor environments.
• Light, easy-to-handle sheets for simple transport and placement.
• Solution suited to construction, renovation and maintenance work on light coverings.

Possible uses

These roof sheets can be used to cover a garden shed, storage room, workshop, storage area, small outbuilding or similar outdoor structure. They are also suitable for replacing worn covering elements, subject to checking the compatibility of the support, slope and fixing system.

Product features

• Product type: set of corrugated roof sheets.
• Number of sheets: 12.
• Material: galvanised steel.
• Finish and colour: light grey.
• Dimensions of one sheet: 129 cm length, 45 cm width and 0.03 cm thickness.
• Equivalent thickness: about 0.3 mm.
• Total set weight: 14 kg.
• Shape: corrugated profile.
• Total theoretical surface: about 6.97 m2 before overlap.
• Electrical voltage: not applicable.
• Power: not applicable.
• Capacity: covering of about 6.97 m2 before overlap.
• Installation: fitting on a suitable load-bearing structure, with appropriate roof fixings.

Installation and usage advice

Before fitting, check that the frame or structure is stable, flat, sufficiently resistant and suited to the sheet dimensions. The roof slope must allow correct water flow. Position the panels in the direction of the slope and provide sufficient lateral and longitudinal overlap to limit infiltration. The actually covered surface will therefore depend on the chosen overlap.

Use special screws for metal sheets or roof fixings compatible with galvanised steel, ideally with sealing washers. The fixing points must be distributed regularly over the structure supports. Wear gloves, protective glasses and suitable shoes when cutting and handling, as the metal edges can be sharp. Do not walk directly on the sheets without suitable support.

To ensure compliant installation, respect the recommendations of the fixing manufacturer as well as the applicable construction rules. Compatibility with an existing structure must be checked before buying, especially concerning support spacing, slope and wind or snow load.

Package contents

• 12 light grey corrugated galvanised steel roof sheets.