Low Temperature Aluminum Welding Wire, Durable Welding Rod for Repair, No Welding Powder Required - 10 Pieces 2.0mm 50cm

Welding Effect -- With internal powder, the wetting wires provide a complete and smooth welding effect. They also have a low melting point, high weldability and corrosion resistance, high thermal conductivity, high electrical conductivity, and excellent processing performance.

Wide Application -- This type of low-temperature aluminum welding wire can weld almost all white metals, including aluminum, aluminum alloy, cast aluminum, aluminum-magnesium alloy, etc. It has high strength, good permeability, and good corrosion resistance.

No Need for Welding Powder -- You don't need to use additional flux powder with aluminum alloys, as the welding core and coating are integrated. Very convenient and easy to weld.

Easy to Use -- It is suitable for complete welding by the primary welding operator. It only requires a small heating device.

The strength of the weld after welding is generally greater than the strength of the base material itself.

Diameter 2.0 mm, each 50 cm long. Our aluminum welding wire has been pre-bent to save space in the package, and you can unbend it.

Caution

1. The surface must be clean.

2. The temperature of the base metal must be maintained at 450°C during the welding process, and the temperature cannot be lower.

3. By avoiding the use of flames to deliberately burn the wire, once the temperature reaches 450°C, the wire will naturally depend on the thermal conductivity of the base material.

Wide Application

Aluminum alloys that some consider irreparable can be repaired, even severely corroded or oil-contaminated white metals.

Material: Copper and Aluminum

Melting Point: 380-400°C

Quantity: 10 pieces