Low Temperature, Double-Sided Cold Bed 266 x 293 mm

Low temperature: This cold build plate allows you to print PLA between 30 and 50°C and PETG between 50 and 70°C without a heated bed. It reduces preheating time for printing at room temperature.
Double-sided coating: The surface has a micro-perforated polymer coating on both sides. This improves the adhesion of PLA and PETG and helps limit printing failures on a smooth plate used without preheating.
Easy model removal: After printing, simply bend the plate slightly to remove the part. No need to wait for the build plate to cool. The plate quickly returns to its flat shape for normal use.
Size and compatibility: This cold build plate measures approximately 266 x 293 mm, or 10.47 x 11.54 inches. It is designed for compatible 3D printers with direct installation and precise alignment on the original build plate. Usage tips: Do not use ABS or TPU filament with this plate. Do not clean the surface with acetone, as this may damage the coating. To maintain adhesion, wash regularly with water.