Low Temperature Tin Bar, Low Temperature Solder Wire, Aluminum Solder Wire, No Solder Powder Required, 500 1.6mm 10PCS

Pure aluminum bar is aluminum welding wire with higher tin content of 99.7%.

It is a kind of universal welding material with wide application.

Features: fine welding effect, with full effect or smooth welding due to internal powder. With low melting point, good weldability and corrosion resistance, high thermal conductivity, high electrical conductivity and good processing performance. very wide application.

It is mainly used for argon arc welding and filling material for pure aluminum, connecting with aluminum bus and guide rod of aluminum plant electrolytic and electric power, chemical, food and so on. No solder powder needed. You don't have to use another aluminum flux powder as the solder core and the coating as the salt base. Very practical and easy to solder. widely use in life.

Suitable for welding or coating of high-strength solder alloy, well forgeability and fine corrosion resistance. Light weight and small volume, very easy to fold or carry. Specification:Size: 500*1.6mm Quantity: 10PCS Material: aluminum Color: Silver Recommended for welding or brazing: 1060, 1350, 3003, 3004, 3005, 5005, 5050, 6053, 6061, 6951, 7005, et cast alloys 710.0 and 711.0 500*1.6mm: Item Weight (One Bar Tin): 2.5g / 0.09oz 500*2mm: Item Weight (One Bar Tin) Tin): 4g / 0.14oz 500 * 1.6mm 10PCS: Package weight: 25g / 0.88oz Package size: 500 * 20 * 20mm / 19.69 * 0.79 * 0.79in < p>How to use:

Step 1: Clean and polish the physical surface.

Step 2: heat the surface of the base material, until the temperature of the wire to the operating temperature, so that you can rely on the solder wire heat transfer from the parent metal to the welds of shape, should not use flames to burn wire, when the base metal surface temperature is sufficient, the wire can well flow and penetrate the metal capillary tube.

Step 3: When repairing thin plate, as long as the metal temperature heated to the tin bar base appropriate working, then use the wire back and back friction fusion to form a weld , only with a molten solder metal brush wire from solder to solder.

Step 4: use propane gas to weld the mall object, use industrial gas heater or induction device to heat and weld large object, natural slow cooling after welding. Application in life: Can be used for a variety of heat sources, such as propane, acetylene oxy and so on. Low temperature tin bar can weld almost all white metal, even what aluminum alloy which cannot be repaired can be repaired. Applicable to the main operator of all-round welding welding, only a small heating device, after welding, the welding resistance is generally higher than the resistance of the base metal itself, can understand gases welding operation. NOTE