LPG, Natural Gas and Carbon Monoxide Detector – Plug-in Wall Monitor, White, High Sensitivity and Audible Alarm

Dimensions 69x120mm Note: As this is a manual measurement, please allow for some errors in the data. Thank you for your understanding. Stay safe - Gas detectors are mainly used to detect natural gas (main component: methane), liquefied petroleum gas (main components: propane, butane), and town gas (alkanes, olefins, arena). When the combustible gas leak exceeds the standard, the gas detector will emit a continuous, slow, accelerated, or loud 85 dB audible alarm. It cannot detect toxic gases such as carbon monoxide. LED digital display and audible warning - The gas detector indicator shows 0 under normal conditions. If a flammable gas leak is detected, the numbers 1-9 and A may appear on the display. Once the concentration exceeds 3% of the LEL (Lower Explosive Limit), the alarm sounds and flashes red. Depending on the combustible gas concentration, the alarm will be in different alarm states. DURABLE AND ENERGY-SAVING - Standard European plug-and-play design, no converters needed, very simple and convenient installation. The detector is mold-resistant, insect-resistant, and corrosion-resistant. Made of flame-retardant ABS plastic, easy to clean. Significant energy savings using less than 2 watts of power. Widely used in restaurants, kitchens, hospitals, hotels, oil plants, garages, gas stations, etc. TESTING METHOD - Press and hold the ignition switch located at the air inlet of the methane detector, then slowly deflate (do not ignite during deflation). When the concentration reaches the standard, the alarm sounds until the gas volume in the environment falls below the alarm point. Note: The system preheating time is approximately 2-3 minutes.