LTC3780 DC 5-32V to 1 V-30V 10A Automatic Step Up Down Regulator Charging Module

1、The circuit board is thickly plated

2、The fuse of input can be changed, to protect power supply and equipment

3、Using high quality chips, low resistance and high frequency capacitor

4、There is aluminum plate on the back, fixed by thermal conductive silicone, which can guarantee heat dissipation

5、The material of inductor is sendust. With 0.8 double wires, it can heat less

Description:

This is a high efficiency regulated power supply module. Output voltage can keep stable when input voltage is below, above or equal to the output voltage. For example, if the output voltage is set as 12V, then even the input voltage changes from 5V to 32V, the output voltage will still be 12V. This module has well protection function, which can be applied to solar battery charging.

Features: 1, The circuit board is thickly plated. 2, The fuse of input can be changed, to protect power supply and equipment. 3, Using high quality chips, low resistance and high frequency capacitor. 4, There is aluminum plate on the back, fixed by thermal conductive silicone, which can guarantee heat dissipation. 5, The material of inductor is sendust. With 0.8 double wires, it can heat less. 6, Constant voltage, current and low voltage protection(MPPT is better

charged by solar power). Output error indicator light will turn on

when there is a short circuit or much error of output voltage.

Specifications: Input Voltage: DC 5V-32V(suggest 10V above ) Output Voltage: DC 1V-32V(adjustable), default is 12V Output Current: 10A(max), less than 7A(suggested), 4A(default) Output Power: 80W(suggested), 130W(max). Please add more heat sink when power is more than 80W. Output Ripple: 50mV (measured at 5A, 12V to 12V) Reverse Input Protection: Not support. If needed, a hot carrier diode can be added in series at the input. Output Intrusion Protection: Not support. If need to charge, a hot carrier diode can be added in series at the output. Working Temperature: -45 to +85℃; Size: 7.8 x 4.6 x 1.5cm / 3 x 1.83 x 0.59"(including bottom aluminum heat sink); Short Circuit Protection: Support Weight: 58g(approx.)

Package includes: 1 x Regulator Charging Module Note:1. Please allow 1-3mm error due to manual measurement. Thanks for your understanding.2. Monitors are not calibrated same, item color displayed in photos may be showing slightly different from the real object. Please take the real one as standard.