M24 x 1.5 round thread die, right-hand metric thread, alloy steel, thread repair tool

Round threading die: Metric thread: M24 x 1.5 (right-hand thread); Outer diameter: 55 mm;

Thickness: 16 mm;

Made of alloy steel, it offers high hardness and torque, good toughness, and excellent wear resistance for a long service life.

Applications: Allows machining, repairing, or cleaning external threads.

Suitable for general threading in stainless steel, aluminum alloy, cast iron, copper, iron, plastic, etc.

Ideal for maintenance and repair work on pipes, plates, and machinery.

Features: Conical locking hole for a robust and secure hold.

Perfect for re-tapping existing threads in hard materials like metal and for creating new threads in soft materials like plastic.

Grease-lubricated surface to prevent corrosion.

The thread is clean and easy to repair.

Easy to use: The die's positioning groove must be aligned with the fixing screw in the center of the die wrench.

Then insert the screw into the die slot and tighten it.

The end of the shank must be chamfered at 45° (1 x 45°), without the chamfer being too deep.

Tips: It is necessary to reverse the direction of rotation every 1/4 to 1/2 turn to facilitate chip evacuation.

Apply a suitable cutting oil to the die's cutting edge during threading.

The shank diameter must be smaller (by approximately 0.05 to 0.15 mm) than the nominal diameter of the desired thread.

An excessive diameter can make cutting difficult and damage the die's cutting edge.