M8 Horizontal Thermal Stripper – Tape and Bundle Fibers 1-48 Cores – Dual Mode, 8 Temperature Settings

Features:1. Precise Fiber Stripping: This optical fiber stripper efficiently handles various fiber types, including ribbon, bare, and bundled fibers (1 to 48 cores) with a length accuracy of 0.1 mm.It can strip multiple fibers simultaneously, significantly improving work efficiency.
2. Intelligent Heating System: Equipped with automatic heating activation (preheating in 5 seconds) and self-regulating elements, this thermal stripper maintains constant temperatures via intelligent algorithms.Dual protection mechanisms ensure safe coating removal without damaging the core in all environments.
3. Wide blade stabilization: The 20 mm wide blade contact area of ​​the fiber optic stripper improves fiber alignment stability, thus reducing the risk of slippage during ribbon fiber processing.Precise spacing ensures clean removal of the coating for 1 to 48 core fibers without leaving any residue.
4.Long-lasting battery: Powered by a 3500 mAh rechargeable lithium-ion battery, which can be used approximately 400 times on a full charge, this fiber tool supports extended field operations.Its memory-free battery allows for flexible charging, while automatic shut-off saves power after 6 minutes of inactivity.
5.Versatile fiber processing: The fiber optic hot stripper is a highly efficient and intelligent fiber processing tool, featuring constant temperature heating and precise wire stripping.Lightweight and portable, it is easy to use and suitable for technical maintenance and daily operations, balancing efficiency and safety.
Specifications:Item Type: M8 Fiber Optic Cable Stripper
Material: Aluminum alloy, peach wood
Applicable Fiber: Bundle fiber, bare fiber, ribbon fiber, invisible fiber
Stripping Capacity: 1-15 core bundle fiber, 1-48 core bare fiber, 2-24 core ribbon fiber, 1-12 core invisible fiber
Fiber Coating Diameter: 125 μm
Coating Stripping Length: ≤32 mm
Blade Limit Width: 20 mm/0.79 in
Temperature: Heating Temperature ≤150 °C
Battery: Lithium-ion battery x1 3500 mAh (built-in battery)
Size: approx. 13.5 x 4.3 x 3.2 cm / 5.31 x 1.69 x 1.26 inches
Auto shut-off: 6 min

How to use:1. Press and hold the power button to turn on the device.Press the temperature control button to select the desired temperature setting. 2. Carefully place the fiber on the heating plate. Fiber types may include: 0.9 mm bundled fibers, bare fibers, ribbon fibers, or invisible fibers. 3. Tightly close the top cover to ensure the upper and lower blades fit snugly without gaps. The indicator light will begin to flash, and you will hear a beep. Gently pull the fiber out, and the protective layer will be removed. 4. When the countdown finishes and you hear a beep, ensure the blades are securely closed and without gaps. The indicator light will flash again. Pull the fiber straight up along the blade for best stripping results. 5. Use a brush to clean debris from the heating plate and silicone pad. 6. Turn off the device to stop its operation.
Package List:1 x USB charging cable
2 x adjustment handles
1 x tweezers
1 x fiber optic hot stripping main unit
1 x brush
1 x instruction manual
1 x storage box
1 x lanyard