Magnetic alignment tool for steel struts, safety camber gauge, for car trunks, motorcycles, automobiles

Features: 1. Made of steel, high-strength plasticity, good toughness, high safety and reliability. 2. Measures camber and caster angle on the wheel hub or brake disc. 3. The magnetic gauge attaches to the hub or brake disc. 4. Has a simple leveling adjustment from -5 degrees to 5 degrees. 5. Use this simple level to restore a vehicle's camber setting after strut repair or installation. Specifications: Features: Made of steel, high-strength plasticity, good toughness, high safety and reliability. Measures camber and caster angle on the wheel hub or brake disc. The magnetic gauge attaches to the hub or brake disc. Has a simple leveling adjustment from -5 degrees to 5 degrees. Easy to read and convenient to use. Use this simple level to restore a vehicle's camber setting after strut repair or installation. Specification: Condition: 100% Brand New Color: As pictured Material: Steel Measuring Range: 1.5 mm Measuring Accuracy: 99% Size: (L) x (W) x (H) 5 x 5 x 13 cm / 1.97" x 1.97" x 5.12" (approx.) Instructions for Use: 1. Remove the positioning sensor from the four wheels (mounting), remove the tire. 2. Carefully use the magnetic level to align the brake wheel from the side. 3. Zero the level. 4. Install on the required positioning of the special parts. 5. Using special tools, and following the magnetic level instructions, adjust the positioning of the parts to the required measuring angle. 6. If a slight discrepancy is found during a new positioning test, everything is fine at the bottom of the car. (Generally, a small discrepancy does not cause positioning failure.) Package Contents: 1 x Magnetic Gauge Tool Note: Please allow 1-3cm error due to manual measurement and make sure you do not mind before ordering. Please understand that colors may appear slightly different due to variations in monitor settings.