Magnetic alignment tool for steel struts, safety camber gauge, for car trunks, motorcycles, automobiles

Features:

1. Made of steel, high strength plasticity, good toughness, high safety and reliability.
2. Measures camber and caster angle on wheel hub or brake rotor.
3. The magnetic gauge attaches to the hub or disc brake.
4. Has a simple leveling adjustment from -5 degrees to 5 degrees.
5. Use this simple level to restore a vehicle's camber adjustment after strut repair or installation.

Specifications:

Features:
Made of steel, high strength plasticity, good toughness, high safety and reliability.
Measures the camber and caster angle on the wheel hub or brake disc.
The magnetic gauge attaches to the hub or disc brake.
Features a simple leveling adjustment from -5 degrees to 5 degrees.
Easy to read and practical to use.
Use this simple level to restore a vehicle's camber setting after strut repair or installation.
Specification:
Condition: 100% Brand New
Color: As pictured
Material: Steel
Measuring Range: 1.5 mm
Measuring Accuracy: 99%
Size: (L) x (W) x (H) 5 x 5 x 13 cm / 1.97" x 1.97" x 5.12" (approx.)
Instructions for Use:
1. Remove the four-wheel position sensor (mounting bracket), remove the tire.
2. Carefully use the magnetic level to suction the brake wheel to the side.
3. Set the level to zero.
4. Installed in the required positioning of the special parts.
5.Using special tools, with the instructions for a magnetic level, adjust the positioning of the parts to the required measurement angle.
6.A new positioning test is performed; if a slight discrepancy is found, everything is fine at the bottom of the car.(Generally, a small deviation does not cause positioning failure.) Package Contents: 1 x Magnetic Gauge Tool Note: Please allow 1-3cm error due to manual measurement and make sure you do not mind before ordering. Please understand that colors may appear slightly different due to variations in monitor settings.