Magnetic gauge tool for car/truck camber and strut wheel alignment, magnetic alignment wheel hub gauge tool

Features: 1. Made of steel, high-strength plasticity, good toughness, high safety and reliability. 2. Measures camber and caster angle on the wheel hub or brake disc. 3. The magnetic gauge attaches to the hub or disc brake. 4. Features a simple leveling adjustment from -5 degrees to 5 degrees. 5. Use this simple level to restore a vehicle's camber setting after strut repair or installation. Specification: Features: Made of steel, high-strength plasticity, good toughness, high safety and reliability. Measures camber and caster angle on the wheel hub or brake disc. The magnetic gauge attaches to the hub or disc. Features a simple leveling adjustment from -5 degrees to 5 degrees. Easy to read and convenient to use. Use this simple level to restore a vehicle's camber setting after strut repair or installation. Specification: Condition: 100% Brand New Color: As shown in the picture Material: Steel Measuring Range: 1.5 mm Measuring Accuracy: 99% Size: (L) x (W) x (H) 5 x 5 x 13 cm / 1.97" x 1.97" x 5.12" (approx.) Instructions: 1. Remove the positioning sensor from the four wheels (mounting), remove the tire. 2. Carefully place the magnetic level inside the brake wheel on the side. 3. Adjust the level to zero. 4. Install the special parts at the required positioning. 5. Using special tools and the magnetic level's degree of adjustment, adjust the positioning of the parts to the required measurement angle. 6. With a new location test, if a small discrepancy is found, everything is fine at the bottom of the car. (Generally, a small deviation does not cause a positioning failure). Package includes: 1x magnetic gauge tool. Notice: Please allow 1-3cm error due to manual measurement and make sure you do not mind before ordering. Please understand that colors may exist as chromatic aberration due to the different placement of images.