Magnetic Mosquito Net Door Window - Anti-Fly Curtain Magnetic Mosquito Net Automatic Closure Ultra Fine Mesh, Cat Window Protection Without Drilling Enjoy The Fresh Air (90x210cm)

Say goodbye to annoying bugs and let yourself enjoy an entire summer from the comfort of your sofa. Curtains can help you very well. Made of high quality nylon fabric with strong magnets and fine mesh, the door curtain is your best bet to keep uninvited guests out while you enjoy the fresh air.

Material: polyester fiber

Size: 80x200cm

Weight: about 0.6 kg

Color: Black

Products include

1x Flying Screen 80x200cm

1x Velcro

A pack of thumbtacks </ p>

Why choose the flying screen?

1. High quality: The fine mesh is made of high quality material, not easy to tear. The fabric sewn on the sides holds the mesh and the magnets well.

2. Self-closing: strong magnets are sewn from top to bottom, perfect sealing and no gaps. It automatically closes behind you when you step through the curtains.

3. No Drilling Required for Installation: The package comes with a long sticky velcro and a bag of pins.

THIN HOLE

It can prevent the entry of most uninvited guests such as bees, flies, mosquitoes, spiders, etc., but at the same time allows fresh air to enter

WIDENING VELCRO

The widened velcro on the top can better fix the door curtain, so that the door curtain can withstand more of force

STOPS IN SECONDS

With 36 magnets and magnetic gaskets, doors close faster, quieter and closer.

When you open the curtains, they close automatically in seconds, preventing mosquitoes from entering

PREVENT THE WIND FROM BLOWING

The curtains have gravity rods at the bottom, which means the curtains can be held in place better and won't be blown away by high winds.

How to properly install mosquito nets?

1. Clean the door frame with a damp towel and let it dry completely. The tape does not adhere to dirty and damp surfaces.

2. Lay the screen flat on the floor with the Velcro side up. Stick the Velcro to the screen, but don't remove the tape behind it.

3. Measure your door with the screen to find the correct position, then unclip the back strap from the top Velcro strip.

4. Glue the mesh to the top frame of the door, making sure the middle piece is slightly above the sides to help the screen close. And make sure the bottom of the screen just touches the ground.

5. Peel off the adhesive tape on both sides from top to bottom and carefully attach it to the door frame.

6. Finally, check if the screen turns on and off correctly, if not, adjust it. Then press down on the strip to make sure it is secure.