Magnetic Welding Stand with Adjustable Angles from 20 to 200 Degrees and Hex Key for Precise Positioning

Product Description Temperature Specifications Minimum Melting Temperature: 138°C Minimum Compression Temperature: 80°C Operating Temperature: -55°C to -125°C Compression Temperature > 160°C Product Details Brand: Maidodo Material: PE, Solder Product Name: Heat Shrinkable Solder Sleeve Max Voltage: 600V Material: Polyolefin Shrink Ratio: 2:1 Dielectric Strength: 1KW Protection Level: IP67 Package Includes: 200 x Red Heat Shrink Connectors 180 x Blue Heat Shrink Connectors 80 x White Heat Shrink Connectors 40 x Yellow Heat Shrink Connectors Features: ● The design, with polyolefin tubing on the outside and hot melt adhesive on the inside, creates a durable, watertight seal between the wire and the connector. ● The watertight connectors prevent corrosion even in the most humid environments. Features: ● The transparent sleeve of the butt connectors provides visual inspection. --- You can monitor the operating temperature and heating time. ● Easy identification: different colors for different connector sizes. ● Can be perfectly used in marine and automotive applications. Features: ● Solder-and-seal connectors allow you to use them in hard-to-reach environments or confined spaces. Since no crimping is required, you simply position the stripped wires in the solder sleeve and apply heat to complete the connection. An easy, one-step connection of insulated and sealed wires. Features: ● Insulation protection: used to seal wire connections, prevent electrical leakage, and protect circuits from rodent damage. ● The solder ring, when heated, melts and flows into the wire connection, effectively preventing the connection from breaking. How to use: 1. Pass a wire through the butt connector tube of the appropriate size, properly connect and treat the wires, and move the connector so that the solder ring section is aligned with the wire connection; 2. Heat both ends of the tube with a heat gun so they shrink. The sealing rings, when heated, become watertight; How to use: 3. Heat the solder ring with a heat gun until it melts and fits into the wire connection; Warning: Heat the heat-shrink tube section until it shrinks tightly around the wires; overheating will completely melt the heat-shrink tube. The solder ring must be heated thoroughly to fit into the wire connection. ------ Providing you with qualified terminals and meeting your needs in a variety of wiring projects. Whether you're working on your boat, vehicle, home, or scientific project, our solder and heat-shrink connectors will ensure a strong solder joint, increased current flow, and watertight connections every time.