Manual Above Ground Pool Vacuum Cleaner, Pool Vacuum for Garden Hose, Hydraulic Vacuum Cleaner for Spa and Garden Pond, In-Ground Pond Vacuum Cleaner for Floor and Walls, Wall-Mounted Pools without El

Operating Principle: This pool vacuum uses a garden hose as its power source (Note: a garden hose with an inner diameter of 12 mm is required for connection). Water in the hose enters the pool cleaner to generate strong suction, and leaves and gravel are sucked into the filter bag. Extended 1.5 m Hand Lever: The 1.5 m length increases the working range of the pool vacuum, which is sufficient to easily handle small and medium-sized family pool scenarios such as above-ground pools, garden ponds, spas, and swimming pools. Upgrade Process: Based on experience from recent years, we have improved the installation process of the vacuum attachments. The combination of attachments is strong and more stable enough to withstand high water pressure and vacuum air pressure. It will not break down under high pressure and can perform its job better. Economical Cleaning Solution: you You don't need to buy an additional power adapter or a vacuum cleaner as a power source, and you don't need to buy an expensive vacuum cleaner; simply connect the garden hose (if the connection is loose, it is recommended to use industrial tape). Secure the water hose and the vacuum cleaner interface. It's a perfect solution for home use. Special attention: 1. The pool vacuum cleaner's connection port must be connected to a garden hose with an inner diameter of 12 mm. 2. If the filter bag's drawstring loop cannot be secured, it is recommended to cut the end of the drawstring with scissors and use both drawstrings of the filter bag to clean it. The bags are safer.