Manual fuel pump, hand pump, fuel hose, fuel pump, manual fuel pump, fuel pre-supply pump with 2 m suction hose

Description

[Unique Design] This large hand pump features a thickened hose and a two-way shut-off valve with one-way oil inlet and one-way oil outlet, effectively preventing backflow. This makes operation more convenient and significantly increases oil flow and delivery capacity.

[Strong Sealing Performance] The hand oil pump is manufactured to a high standard, and each connection incorporates special reinforcement technology to ensure a good seal.

[Durable Material] Made of high-quality PVC, which is odorless and non-irritating.

Oil-resistant, heat-resistant, corrosion-resistant, flexible hose, super transparent so you can easily observe the water flow.

[Easy to Use] Insert the oil inlet hose into the bottom of the oil tank, insert the oil outlet hose into the prepared oil tank, and squeeze the rubber bulb 3 to 5 times. The fluid will flow automatically. The larger the drop, the higher the flow rate.

[Wide Range of Applications] This transfer pump is suitable for easily transferring and pumping gasoline, diesel, oil, water, and other common liquids, and can also be used as a water changer for home aquariums.

Advantages of the Fuel Suction Pump: 1. Space-saving and conveniently stows in the trunk, ideal for travel. 2. The pump is made of high-quality nitrile rubber and an aluminum alloy. The rubber hose is resistant to oil, diesel, and gasoline. 3. The liquid flows on its own at moderate pressure. 4. The hand pump effortlessly draws and pumps gasoline, diesel, oil, water, and other liquids. These suction pumps are ideal for a variety of applications. Specification: Material: Rubber + PVC Color: Transparent Hose Length: 2 m Diameter: 18 mm Wall Thickness: 2 mm Flow Rate: 10 liters/minute Operating Pressure Range: 0.2–6 bar Operating Temperature Range: -30 °C to 130 °C. Scope of delivery: Suction pump * 1, Hose * 1, Check valve * 2. Notes: 1. The liquid to be extracted must be higher than the pump head. 2. The hand pump is marked with an arrow. Press and hold the arrow before pumping. 3. The connection end must not be in direct contact with the liquid surface. 4. The fuel tank must not contain a check valve in order to draw oil from the vehicle's fuel tank.