Manual throttle cable controller for excavator, 4m, stainless steel motor control for truck agitation

Features: 1. FAST CONTROL: This throttle cable offers more direct and faster throttle control with a quicker and more responsive throttle. 2. Easy Installation: The throttle cable is essentially an adapter cable, easy to install, no modifications required. Simply remove the old throttle cable and install it directly. 3. PU SHEATH: The throttle cable sheath is made of PU, which can be bent as desired, does not easily deform, and has a long service life. 4. STAINLESS STEEL SEAL: The throttle cable connector is made of stainless steel, which can withstand the elements and is protected from external factors. 5. Perfect Replacement: The throttle cable can be a perfect replacement for a broken throttle cable to ensure the excavator's working performance. Specifications: Item Type: Excavator Manual Throttle Cable Controller Material: PU, Stainless Steel Machine Use: Excavator, Mixer Specification: Approx. 4m / 13.12ft Introduction: The throttle cable is connected to the throttle pedal at one end, and the other end is connected to the throttle body via a pivot point and guide. When the throttle pedal is pressed, the throttle body opens to a corresponding angle. Therefore, it allows for more direct and rapid throttle control, resulting in a quicker and more responsive throttle. How to use: 1. First, thread the throttle cable through the carburetor cover. Then, place the spring on the throttle cable. Next, pull the throttle cable through the throttle valve hole, remove it from the slot on the bottom, and insert the end of the throttle cable into the groove on the bottom of the throttle valve. 2. In the carburetor throttle valve, note that the throttle valve has a small beveled side facing the idle speed screw, and a long grooved side facing the carburetor has a raised point on this side of the drop at the end. Then screw the cover on. This time, from the carburetor throat, you can see the valve drop. 3. Open the piston cover, then pass the throttle cable through the middle of the piston cover spring. 4. Pass the throttle cable through the hole in the piston, then lock and secure it with screws to complete the installation. Package List: 1 x Throttle Cable Controller (Excavator Manual)