Manual Throttle Cable, Premium PU Stainless Steel Throttle Cable for Excavator Mixer, Long-Lasting Durability for Excavator Accessories

1. APPLICABLE EQUIPMENT: This throttle cable is suitable for excavators and concrete mixers. The 2m cable is long enough to meet your needs! 2. FAST RESPONSE: Adjust the throttle opening and closing via the cable for a quick and immediate response. The throttle is responsive and available at all times. 3. PU AND STAINLESS STEEL MATERIAL: The tube is made of PU, which can be bent freely and is not easily deformed. The joint is made of stainless steel, which can withstand harsh weather and environments. The throttle cable can be used without being affected by external factors and has a long lifespan. 4. EASY INSTALLATION: Easy installation without modification; it can be installed directly after removing the old throttle cable. 5. IDEAL REPLACEMENT: This cable is an ideal replacement for old and damaged parts for better machine control. Technical Data: Item Type: Throttle Cable Material: PU, Stainless Steel Applicable Model: Shovel, Mixer. Technical Data: Approx. 2 m/6.6 ft Introduction: The throttle cable is connected to the accelerator pedal at one end and to the throttle at the other end via a swivel and guide. When the accelerator pedal is pressed, the throttle opens to the appropriate angle. Therefore, the throttle can be controlled more directly and quickly, and the throttle response is faster and more timely. Instructions: 1. First, pass the throttle tube through the top cover of the carburetor, then place the spring on the throttle tube, then pull the throttle tube through the throttle hole, out of the nearby slot, and wrap it around the bottom. Insert the end of the throttle tube into the slot at the bottom of the throttle plate. 2. When installing the throttle plate in the carburetor, pay attention to the slight slope of the throttle plate towards the idle screw and the long slot towards the side with the carburetor protrusion facing downwards, then tighten the cap. At this point, you can see the throttle plate from the carburetor throat to point 3. Open the piston cap, then pass the throttle cable through the center of the piston cap spring. 4. Pass it through the throttle cable insertion hole, then lock and secure it with screws to complete the installation. Package list: 1 throttle cable.