The IP-EVCP-TC from Matt:E is an IP65 rated, simple single connection centre that allows for the connection of 1x 32A single-phase charge point to the existing PME earthing facility without the use of Earth electrodes, saving time during survey and installation.
It incorporates a unique monitoring device that disconnects all poles including CPC in the event of a broken Neutral fault in line with Regulation 722.411.4.1(iv) and has the optional additional functionality for load curtailment in line with Regulation 722.311.20, isolating the charge point from the supply once the house consumption rises above the pre-set limit (60A) and automatically restores the power to the charge point when the load falls back to a satisfactory level.
Matt:E IP-EVCP-TC60 Single Phase 32A Terminals House Consumption Limiting 60A
Replenishh Order Code:
EV House Consumption Limiting 60A Connection Centre
Incoming Supply Rating
Max Terminal Entry
Input: 2.5mm² to 25mm², Output: 2.5mm² to 10mm²
Dimensions (H x W x D)
300 x 200 x 129mm
230V, single phase
ABS-HB flame retardant plastic
Number of ways
Load management unit with hard-wired Current Transformer
Whole House Consumption Limiting, factory set at 60A
Built in Matt:E technology
No Earth electrodes required
Current transformer with simple plug-and-play connection
Built-in 100A isolator
Designed and built in the UK
BS:7671 2018 Amendment 1 2020 compliant
This unit is designed for use in domestic dwelling applications where a single phase PME supply is feeding Electric Vehicle Chargers. It should NOT be used in premises with 3 phase supplies.