Mini LED Work Inspection Lights Rechargeable 500 Lumens Magnetic Work Light Portable Small Keychain Waterproof Flashlights for Camping Repair Emergency Lighting [Energy Class A++]

4 Lighting Modes: The flashlight has 4 lighting modes to meet your different needs: COB high mode, COB low mode and COB strobe mode. Press and hold the power button for 2-3 seconds until it reaches maximum brightness.

High Brightness: These inspection lights for flashlights carry keys can emit a maximum of 500 lumens of light. It offers bright light with a wide angle. Brighten up your path and light up small dark rooms.

Portable Design: The portable LED flashlight is small but very bright. The strong magnetic base and rotating handle let you free your hands while you work. The magnet design allows the light to be attached to any metal, the strong magnets can hold the work light while working or repairing on ferrous metal surfaces. Plus, the 180-degree bendable handle provides multi-angle illumination.

USB Rechargeable: This USB rechargeable flashlight is powered by a built-in battery, including a micro USB to USB charging cable . Highly efficient and powerful LED chip with overload protection.

Widely used: The portable flashlight has a carabiner that can be easily attached to a keychain or pocket, and it is waterproof and shockproof. Alternatively, it is also a good bottle opener. Ideal for home, outdoor, workshop, automotive, repair, camping, hunting, fishing, dog walking and emergency lighting inspection lamps.

Product parameters:

1: 500mAh Li-polymer battery

2: operating time lighting 1.5-4 hours

3: Type-C charging interface

4: Material aluminum alloy + PC

A. Do not use overvoltage, the voltage should not exceed 4.2V;

B. The positive pole of the battery is facing forward, do not reverse it, otherwise it will cause a short circuit

C. Non-professionals do not open the circuit board

Flashlight (headlight) operating instructions

1. When the flashlight (headlight) is used, select the corresponding battery according to the flashlight (headlight) requirements on voltage and battery. Do not use it indiscriminately to prevent the circuit board from being burned. Do not use batteries of different types and voltages at the same time.

2. In use, when the brightness of the flashlight (headlight) is significantly dimmed, the flashlight (headlight) needs to be charged.

3. Warm reminder: Do not direct the light of the flashlight (headlight) into people's eyes, it is super bright and dazzling, so as not to affect eyesight, especially for children.

Troubleshooting

1. Check the battery: Make sure the battery is charged and install it the right way round. Do not use batteries of different brands and do not mix old and new batteries.

2. Check the back cover: make sure the switch is tight and in good contact, make sure the copper column of the back cover is in good contact with the sheet metal of the back cover pressure ring, and pay attention if the flashlight (headlight) is loose.