Mini Pneumatic Chamfering Machine, Portable 45 Degree Chamfering Machine with Replacement Blades for Chamfer Deburring (6 R Inserts + 6 C Inserts + 6 Bearings)

Upgraded Design: This mini black 45 degree chamfering machine has a new lightweight design, small and exquisite, smooth cutting, high efficiency, low vibration, very smooth cutting of carbon steel. Comes with high quality bearings and blades for smoother deburring and chamfering. Adjustable speed and angle: Rotation speed: 30,000 rpm; chamfering capacity: C0.1-C1.5; ARC angle: R0.1-R1.5. Adjustable depth: 0.1mm-0.9mm; air consumption: 0.4/min. Equipped with 1-5 air intake setting, the chamfering machine can be freely adjusted to the appropriate intake speed for use. Use the matching wrench to easily adjust the chamfer size and replace the blade. Safety Assurance: The safety switch is used to prevent accidental contact to protect the user's safety at all times.Alloy steel baffle, safety buckle and metal button for safe use.
Chamfer and ARC angle: Rounding and beveling are possible by changing the inserts (2 types of inserts are optional). Suitable for different angles, such as straight edge chamfering, inner and outer round hole chamfering, and irregular chamfering for metal cutting and round R side.
Application: The pneumatic chamfering machine can be chamfered in the narrowest and shallowest space, suitable for different angles, such as straight edge chamfering, inner round hole chamfering and exterior.;Upgraded Design: This mini black 45 degree chamfering machine has a new lightweight design, small and exquisite, smooth cutting, high efficiency, low vibration, very smooth cutting of carbon steel.Comes with high quality bearings and blades for smoother deburring and chamfering.; Adjustable Speed ​​and Angle: Rotation Speed: 30,000 RPM; chamfering capacity: C0.1-C1.5; ARC angle: R0.1-R1.5. Adjustable depth: 0.1mm-0.9mm; air consumption: 0.4/min. Equipped with 1-5 air intake setting, the chamfering machine can be freely adjusted to the appropriate intake speed for use. Use the matching wrench to easily adjust the chamfer size and replace the blade.;Safety Assurance: The safety switch is used to prevent accidental contact to protect the user's safety at all times. Alloy steel baffle, safety buckle and metal button for safe use.;

The woodworking tools are designed to stimulate your creative potential and improve the efficiency of your woodworking projects.

• 1.Before using the new machine, please inject pneumatic oil and inject about 4°C into the air inlet. After continuous use for about 3 hours, about 4°C is also injected into the air inlet.

  2. After injecting pneumatic oil, allow the machine to idle for about ten seconds (do not operate) and allow the internal parts of the grinder to be lubricated as a whole before continuing.

  3. If the oil-water separator is not used, water and oil and gas will enter inside the machine for a long time. The appearance of adhesion slows the rotation of the machine, resulting in insufficient speed and torque. the pneumatic oil should be introduced into the air inlet, and the machine can be used normally after slowing down for about ten seconds.

• 1 chamfering machine
• 6 R inserts
• 6 C inserts
• 6 auxiliary bearings
• 1 EU connector
• 2 adjustable wrenches
• ARC angle: R0.1-R1.5 Chamfering capacity: C0.1-C1.5 Rotation speed: 30,000 rpm Depth reversible: 0.1 mm-0.9 mm Chamfer opening: ≥ 8 mm Inlet connection: 6.35 mm Minimum Plate Thickness: 3 mm Air Intake Adjustment Switch: 5-speed Air consumption: 0.4 m³/minute 4.3 out of 5 stars

  Mini pneumatic chamfering machine, portable 45 degree with replacement blades for deburring the chamfer (6 R inserts + 6 C inserts + 6 bearings)

  Permanent link:

  Have you found a lower price? Tell us.