Mini pneumatic deburring machine for aluminum – 45° chamfer with 6 R-blades, 6 C-blades and 6 ball bearings included.

Durable Material: The improved metal construction is made of chrome-plated aluminum and features high-quality rollers and blades for smooth operation and extended service life.
Adjustable Lifespan and Angle: Speed: 30,000 RPM; Cooling Capacity: C0.1–C1.5; Breaking Angle: R0.1–R1.5; Adjustable Depth: 0.1–0.9 mm; Air Consumption: 0.4 l/min. Thanks to the air intake regulation (levels 1–5), the air cooler's intake speed can be individually adjusted. The included wrench allows for easy adjustment of the brake size and blade replacement.
Safety Guarantee: A safety switch prevents accidental activation, thus protecting the user's safety at all times. Steel guide plate, safety lock, and metal knob for safe operation. Circular and arc angles: Rounding and chamfering are possible by changing the inserts (two insert types are not optional). Suitable for various angles, e.g., for right-angled edges, internal and external round holes, and irregular machining of metal and round parts. Application: The pneumatic interchangeable machine allows use in the tightest and deepest areas and is suitable for various angles, e.g., for right-angled edges and internal and external round holes. Durable material: The improved version of the metal chamfering machine features a new, chrome-plated aluminum cover with high-quality rollers and blades for smoother grinding and changing. Adjustable speed and angle: Rotational speed: 30,000 rpm; Cooling capacity: C0.1–C1.5; Arc angle: R0.1–R1.5; Adjustable depth: 0.1 mm–0.9 mm; Air consumption: 0.4 l/min. Equipped with an air inlet regulator with settings from 1 to 5, the brake machine can be continuously adjusted to the appropriate setting. The included wrench allows for easy adjustment of the brake lever and blade replacement. Safety guaranteed: The safety switch prevents accidental activation, thus protecting the user at all times. Steel deflectors, a safety lock, and a metal knob ensure safe operation. Specifications: Arc angle: R0.1–R1.5. Cooling capacity: C0.1–C1.5. Speed: 30,000 rpm. Cutting depth: 0.1–0.9 mm. Slot opening: ≥ 8 mm. Inlet connection: 6.35 mm. Minimum sheet thickness: 3 mm. Air inlet regulation: 5 settings. Air consumption: 0.4 m³/min.

Blade replacement instructions:
Use a hex key to lower the sight, remove the deflector plate, loosen the blade with the included wrench, remove the old blade, and replace it with a new one.

Tips for use and learning:
1. Before using the new machine for the first time, fill the air inlet with compressed air oil at 4°C. After the first use, run the machine for 3 hours at an ambient temperature of 4°C and refill the air inlet with compressed air oil.

2. After filling the air inlet with compressed air oil, rotate the machine slowly for approximately 10 seconds (do not start it) to lubricate the internal parts before proceeding.

3. Air is generated using a compressor (air pump) for mechanical use. The compressor's output is between 6 and 8 kg. Generally, most of the gas compressed by a conventional compressor consists of water, and the compressor piston contains a small amount of lubricating oil. If the oil-water separator is not used, water, oil, and gases will enter the machine over time. The resulting deposits slow the machine's rotation, leading to insufficient speed and torque. In this case, the pneumatic tire should be inserted into the air intake. After a short delay of ten seconds, the machine can be used normally again. Package contents: 1 gear-changing machine, 6 R-sockets, 6 C-sockets, 6 auxiliary wheels, 1 EU plug, 2 grinding wrenches.