Mini pneumatic sander, random oscillating pneumatic orbital sander with polishing sanding disc pad kit, 1/4" inlet, 8 CFM, 15000 RPM no-load speed (JP nozzle)

General Description

The mini pneumatic sander is a powerful tool designed for grinding, polishing, and rust removal on various materials. With its eccentric design and ability to reach hard-to-access areas, it is ideal for finishing and detail work. This model is equipped with a 3 mm shank and can be used for a variety of applications, from polishing to fine detail cutting.

Technical Specifications

• Model: AT-1500H48
• No-load Speed: 15,000 RPM
• Air Inlet: 1/4 inch
• Compressed Air Flow: 8 CFM
• Exhaust Direction: Rear Exhaust
• Air Connection Screw: 1/4-19 NPT
• Sound Level: Less than 83 dB
• Suggested Air Tube Inner Diameter: Approx. 6.3 mm (0.2 in)
• Material: Stainless Steel

Compatibility and Accessories

• Polishing Sanding Disc Pad Kit with 3 Sizes and 6 types of pads to meet different needs.

Installation

• Ensure the air intake is clean before use.
• Use an oil-water separator and change the oil regularly to keep the machine in good condition.

Operation

• Add 3 to 5 drops of pneumatic oil to the air intake before each use.
• Adjust the airflow to control the grinding, polishing, and waxing speed.

Other Information

• This machine is very precise and designed for rough grinding work.
• Be careful not to introduce fine sand or iron filings into the mechanism to avoid malfunctions.