Mini rechargeable electric drill, cordless multi-function electric motor, electric drill, electric grinder

Main Features

It is very suitable for sanding, drilling, and carving artwork and crafts.

It is perfectly suited for manual and specific tasks.

It is perfect for making lovely little Christmas gifts for family and friends.

We recommend reading the manual before use and not using it when the spindle is locked.

Technical Data

Haizi Battery Type: 3.6V Li-ion / 0.6Ah

Charging Voltage: 100-240V

Size: 3/32" (2.3mm)

Speed: 5,000/10,000/15,000 RPM

Package Contents

1 * Rotary Tool PCG01B 3.6V Cordless Drill

Matching Kit: 1 * 24 pieces

1 * USB charging cable with European plug

Simple three-speed adjustment: one button can change the speed to 5000 rpm, 10000 rpm, 15000 rpm, to adapt to different working environments

Depending on the drill bits, 24 accessories help to perform different tasks, such as drilling, grinding, engraving, etc., the chuck size is 3/32 (2.3 mm)

Easy to carry with overload protection, safe and reliable work; Soft rubber handle

Instructions for the Use of Power Tools

When using power tools, to reduce accidents such as fires, electric shocks, and injuries, you must pay attention to the basic safety elements listed below; please read the following safety elements carefully before proceeding.

1. Keep the work area clean and do not use power tools in messy work areas and on cluttered work surfaces.

2. Do not use power tools in dark and damp locations. Keep them out of the rain. Do not use in flammable liquids or where flammable gases are present.

3. Do not allow children and idlers near the work area. Do not allow the rollers to come near touch tools or power cords.

4. When the power tool is not in use, it must be stored in a dry place out of the reach of children and must be locked. 5. Maintain proper feed rate and pressure to ensure safer and longer-lasting operation of the tool. 6. Operate within the specified application range and do not exceed the limits to avoid overload protection. 7. Maintain proper posture while working, keep your hands steady, and do not stretch your hands over the tools to pick things up. 8. Blades should be lubricated and replaced periodically to keep them sharp, and threads should be checked regularly. 9. When tools are not in use or for maintenance, when changing attachments and blades, be sure to unplug the power cord. 10. Check before turning on the switch to start the machine. It is necessary to check that the cutting workpiece adjustment tools and the fixing wrench are completely removed.

11. To prevent accidental starting, you must check that the tool switch is off before inserting the plug into the power source. After switching on, do not frequently press your finger on the switch.

12. Outdoor extension cords: When using tools outdoors, be sure to use outdoor extension cords.

13.Do not wear loose clothing or accessories to avoid entanglement when the tool is rotating. Rubber gloves and non-slip industrial safety shoes must be worn outdoors. Protective cap.

14. Use safety glasses and wear a mask when there is excessive chipping and dust.

15. Do not step on the wire, do not drag the wire-moving tool, and avoid touching the hot object and sharp metal edge or getting grease wet.

16. Secure the workpiece. Use clamps to secure the workpiece to be cut, which is safer than holding the workpiece by hand.

17. When repairing or replacing parts, be sure to use parts specified by the original manufacturer and send them to a professional repair center for replacement.

18. Pay attention to the workpiece and the tool in unison. Tools should not be used when fatigued.

19. Before using the tool, you must carefully check if the tool guard or other parts are damaged and determine if the degree of damage will affect the normal operation of the tool. Check if all moving parts are in the correct position, if the parts to be fastened are fixed, etc. If the guard or other parts are damaged, or if there is a problem with the tool's switch, please have it repaired or replaced by a specialist shop. Do not force a faulty switch to activate the tool.

20. During operation, your body must not come into contact with grounded metal objects, such as iron pipes, radiators, refrigerators, etc.

Shop Tips:

1. The size is measured manually, please allow for a 1-3 cm error. 2. Due to different monitor pixels, there may be a color difference; please refer to the actual product. New and used products are shipped randomly, and there is no difference in quality, so please feel confident in your purchase.