Miniature 3P circuit breaker for PC network - passive/active control - AC400V - industrial use

Features:1.[PC Control] This circuit breaker enables real-time monitoring and remote control of power sources in homes, venues, and outdoor environments via PC, without the need for a gateway, wired connections, or additional accessories.
2.[Smart Technology] Transform any factory into a smart facility with this smart circuit breaker, enabling centralized machine control and flexible monitoring of electrical operations for improved efficiency.
3.[User-Friendly Design] Equipped with a manual switching handle for quick and responsive operation, opening and closing the circuit breaker is easier.With a mechanical opening lock to prevent accidents caused by incorrect operation during power maintenance.
4.[Multi-purpose] Protects electrical circuits and equipment from overloads and short circuits, and provides protection against frequent electric motor starts and overload short circuits.
5.[Full Protection] Includes surge protection, overload short-circuit protection, remote lockout protection, and manual/automatic operation.
Specifications:Item Type: Circuit Breaker
Material: Flame Retardant PC
Voltage Rating: AC400V
Frequency: 50Hz/60Hz
Number of Poles: 3P
Sheet Current Rating: 125A
Breaking Capacity Icu: 6kA
Life: Mechanical 20,000 cycles, Electrical 4,000 cycles
Cable Cross Section Area: 35mm²
Installation: Mounted on a standard 35 x 7.5mm DIN rail
Snap Release Form: C
Complies with Standard: GB10963.1; IEC60898-1

How to use:Follow the instruction manual.
Package list:1 x Circuit breaker
1 x User manual
Note:1. This product only supports top input and bottom output.Do not reverse the direction, otherwise the handle cannot be pushed upwards.Some distribution boxes have input lines at the bottom and output lines at the top; in this case, our circuit breaker must be reversed.2.The incoming terminal of the circuit breaker body must be connected to a 400V power supply.The control section then has two wires connected to terminals 1 and 3 for passive control, and to terminals 2 and 3 for active control.