Miniature Nitrogen Gas Spring in Alloy, X170 Series, For Stamping Parts - Model X170-015, Force 2800N

Features:

1. There is an inflation port at the bottom of the nitrogen gas spring cylinder, which can be used for micro pipe connection system.
2. There is a standard C-shaped notch in the upper part of the cylinder, as well as the lower screw hole, can provide various installation possibilities.
3. The final force of the gas spring is 2800N, the initial force is 1700N, and the stroke is long, which is practical.
4. After the special fine processing process, the hardness is high and the surface roughness reaches about Ra0.02um.
5. Made of alloy and adopts integral cutting and forming process, which is safer and more reliable than pipe welding.

Specifications:

Item Type: Nitrogen Gas Spring
Material: Alloy
Purpose: Compression Nitrogen Cylinder
Cylinder Diameter: Approx. 19 mm / 0.7 inch
Plunger Diameter: Approx.11mm / 0.4inch

Package List:

Package Including: 1 x Nitrogen Gas Spring
1 x Storage Box

Note:

1. Do not use the piston rod of the nitrogen gas spring for fixing, and the threaded hole at the end of the piston rod cannot be used as a lifting hole for lifting.2. Do not modify the following aspects of the nitrogen gas spring:(1) Drill holes on the nitrogen gas spring cylinder block, seal ring, etc.(2) The piston rod is shortened to reduce the stroke(3) Do not carry out any other processing on the nitrogen gas spring and its accessories3. Do not use nitrogen gas springs for purposes outside the scope of product catalog specifications.4. Do not allow the ammonia gas spring to return freely after being compressed, as this will damage the internal structure.