MKS Servo42c PCBA board kit for stepper motor servos with 8 MOSFETs for 3D printers

Features: Closed-loop position/speed/torque control, enabling high-speed operation without step loss. Vector control (FOC), low noise, low vibration, and low heat generation. Four half-drive bridges with eight MOSFETs for high efficiency. 14-bit magnetic encoder with high angular resolution. Subdivision from 1 to 256 points, with odd subdivisions available (e.g., 11 subdivisions). Maximum speed: 1000 rpm. Compatible with 0.9° or 1.8° angle motors. Maximum printing speed: 150–180 mm/s. Easy installation and wiring. USART interface for connection to a computer via serial port, allowing parameter adjustment and viewing. Specifications: Board Type: MKS SERVO42C V1.0 Microprocessor: Crotex-M0+ Motor Driver: 4 half-bridges with 8 MOSFETs Input Voltage: 7-28V Encoder: 14-bit magnetic encoder Adjustable Current Range: 0-3000mA Subdivision: 1-256 (16 default) Maximum Speed: 1000 RPM Angular Resolution: 0.08 degrees Update Frequency: Position 10 kHz / Speed 10 kHz / Torque 20 kHz PCB Dimensions: Approx. 39 x 35.8 mm / 1.54 x 1.41 inches Note: Due to lighting effects and shooting angles, slight variations may exist in the product. Please allow a 0-1 cm error margin due to manual measurement. Package Contents: 1 x MKS SERVO42C V1.0 motor