12V Time Delay Relay Module with Dual Cycle Timer and Digital LED Display

1. Timing range: 0-999 seconds, 0-999 minutes, 0-999 hours; three options are available. 2. Function sets: delay, synchronization, cycle; 18 possible combinations. 3. The product can be used for synchronization, delay, cycle synchronization, intermittent synchronization, etc. 4. The product can be used as a synchronization switch and timer alarm control panel. 5. Maximum working current: 10A; maximum power: 1500W. Specification: Features: Time range: 0-999 seconds, 0-999 minutes, 0-999 hours; three options are available. Function sets: delay, synchronization, cycle; 18 possible combinations. The product can be used for synchronization, delay, cycle synchronization, intermittent synchronization, etc. The product can be used for timer switches and alarm control panels. The maximum working current is 10A, and the maximum power is 1500W. Specifications: Product size: 3 x 9.7 x 5.2 cm / 1.1 x 3.8 x 2.0 inches Time range: 0-999s / 0-999m / 0-999h Maximum working current: 10A Maximum power: 1500W Voltage: DC 12V Weight: 70g Instruction manual: Before use, the user should note that a certain data set will be displayed. After waiting 6 seconds, the memory module will automatically save the data set. (1) Press the SET button to enter time setting mode. The digital display will flash. Use the plus and minus buttons to adjust the T1 and T2 synchronization settings. After setting the time, wait 5 seconds. The module will then automatically save the settings. (2) Press SET to enter parameter setting mode. There are two sets of parameters that the user can select: P0 and P1. In the current mode, briefly press SET to switch between P0 and P1. In P0, the P1 parameter can be set to its own timer mode using the addition and subtraction buttons. P0-0: Synchronization mode is 0 to 999 seconds. P0-1: Synchronization mode is 0 to 999 minutes. P0-2: Synchronization mode is 0 to 999 minutes. P1-0: Timer relay T1 (time delay T1) P1-1: Timer relay T1 (time delay T1) trips P1-2: Timer relay after T1 (time delay T1), then the successor timer T2 (time delay T2) ends. P1-3: Timer relay T1 is released (time delay T1), then the successor timer T2 (time delay T2) is energized. P1-4: Timer relay after T1 (time delay T1), then the successor timer T2 (time delay T2) is energized, repeat the cycle. P1-5: Timer relay T1 is released (time delay T1), then the successor timer T2 (time delay T2) is energized, repeat the cycle. Package included: 1 x time delay relay Note: The data is measured manually, please allow an error of 1-59cm. Due to differences in light and screen, there will be some color difference; the specific product received in kind shall prevail.