Motion sensor A, works with the wireless doorbell receiver

Product Type: Motion Detector
Detection Range: 2–8 m, 100° (horizontal), 15° (vertical)
Installation: Attach the infrared sensor to a door, wall, roof, or other surface using adhesive tape or 2 screws.
Power Supply: 3 AAA alkaline batteries (not included) or Micro-USB (not included)
Note: Only works with the receiver; cannot be operated independently. Power Supply: 3 AAA alkaline batteries (not included) or Micro-USB (not included);

4 Steps to Pair the Motion Detector with the Receiver:

1) Charge the batteries for both the receiver and the sensor.

2) Press and hold the "On/Off/Mode" button on the receiver for 3 seconds to turn it off.

3) Press and hold the "Volume" button for 3 seconds; The receiver switches to learning mode.

4) When you move your hand in front of the motion detector, the motion detector's indicator flashes once, signaling successful pairing.

Parameters:

Size: 82 x 45 x 74 mm

Frequency: 433 MHz

Detection range: 2 ~ 8 m

Detection angle: 100 degrees (horizontal); 15 degrees (vertical)

Power supply: 3 x AAA batteries (not included) or Micro-USB (not included)

Package contents:

1 x motion sensor

1 x mounting base

1 x double-sided adhesive tape

2 x screws