Motorcycle Speedometer, Waterproof LCD Display Digital Hour Meter Gauge Timer for Quad Motorcycle Snowmobile Motocross Pit Bike Lawn Mower Tractor Truck

Description

This hour meter uses a 100% epoxy-encapsulated housing that is water-resistant, interference-resistant, and high-temperature resistant. It integrates a tachometer and hour meter into one unit and works on any gasoline engine. It uses an LCD display and a self-powered design (no fear of power loss). Monitors the lifespan of vehicle oil circuits, valves, settings, spark plugs, etc. Easy installation - peel and stick, no wiring required, installation with included wire and mounting screws. Easy to use: simply place the hour meter on the equipment surface. When vibration and movement occur, the timer icon will begin flashing, indicating that the equipment is working. You can then monitor the equipment's operating time. Note: The recorded time cannot be erased. Hour meter for use with marine, motorcycle, quad, snowmobile motocross, pit bike, lawnmower, tractor, and truck    Hour Counter
The display shows the total operating time of the machine and remains visible.
The maximum total hour value is 99,999 hours; the total hour reading is displayed from 0 to 9,999.9 hours, with an accuracy of 0.1 hours; the total hour reading is displayed from 10,000 to 99,999 hours, with an accuracy of 1 hour.
Waterproof
It is sealed with epoxy resin, with an IP68 waterproof rating.
It is also shock and high-temperature resistant to prevent damage during transport and use.
Other Functions
The timer starts when the detected signal passes through the spark plug wire. It stops quickly after the engine is switched off to prevent accidentally recording excess hours. The TOT hours cannot be reset. Automatic erasure occurs if the maximum value is exceeded.