MX62 VHF/UHF Duplexer 144/148MHz 400/470MHz Indoor Different Frequency Antenna Combiner

General Description

The MX62 VHF + UHF duplexer is designed for indoor use and allows you to combine the output of an HF/VHF transceiver and that of a UHF transceiver, allowing both transceivers to be connected to the same antenna. It can also separate UHF/VHF transmissions, allowing one transceiver to be connected to two antennas. This duplexer operates at frequencies of 144-148 MHz and 400-470 MHz.

Technical Specifications

• Operating Frequency: 1.6 - 55 MHz / 144 - 148 MHz and 400 - 470 MHz
• Endurance: 100W for 1.6-55 MHz and 144-148 MHz; 60W for 400-470 MHz
• Isolation: 45 dB
• Insertion Loss: 0.1 dB or less for 1.6-55 MHz; 0.3 dB or less for 144-148 MHz and 400-470 MHz
• SWR: 1.2 or less for HF; 1.15 or less for VHF; 1.19 or less for UHF
• Impedance: 50 Ohm
• Dimensions: 74 x 33 x 63 mm (2.9 x 1.3 x 2.5 inches)
• Material: Alloy
• Coaxial Load: 5D-FB (length: approximately 30 cm / 11.8 inches)
• Interface: MJ-MP MP

Use

The MX62 VHF + UHF duplexer is designed for indoor use. If used outdoors, it should only be used for short periods and in good weather conditions. It is important not to use it in case of precipitation.

Other information

• Package list: 1 x duplexer, 2 x frequency divider lines